Product Description:

The HCS02.1E-W0054-A-03-NNNV is a servo drive controller engineered by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It serves as the axis control and power stage within automated production equipment, converting three-phase mains energy into regulated motor current. Real-time feedback interfaces help keep motion sequences in packaging, handling, and processing stations synchronized. This type of drive is suited to machines that require coordinated axis motion, controlled acceleration, and stable power delivery from a cabinet-mounted controller.

It operates from a three-phase supply of 3 × AC 200…500 V ±10%, which gives the drive a wide input range for different plant power systems. Within that span, the converter supports a continuous mechanical output from 1.5 to 11 kW, covering small auxiliary axes as well as mid-sized spindle duties. During acceleration or braking peaks, the current can rise to 54 A. Heat is removed by internal air cooling, in which an integrated blower moves cabinet air across the heat sink. Because the cooling air comes from inside the cabinet, enclosure ventilation must handle the thermal load created by the drive during dynamic operation. An enclosure rating of IP20 means the unit is intended for installation in a switchgear cabinet.

The controller is identified as design version 1 and belongs to the HCS02 line. Its power section supports infeeding and regenerative operation, so it can draw energy from and return braking energy to a shared DC bus. This operating mode supports common DC-bus applications where multiple axes exchange energy during changing motion cycles. Auxiliary electronics such as the control logic, I/O, and the integrated brake transistor are supplied internally with DC 24 V tapped from the DC link. That internal supply arrangement supports the drive’s low-voltage functions without requiring a separate source for those circuits.