HCS02.1E-W0054-A-03-LNNN-AA
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911326661
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS02.1E-W0054-A-03-LNNN-AA is part of the HCS IndraDrive Controllers series and rated for 5.4 kW output power. It operates at 3 × 400 V AC, supports a multi-encoder interface, and uses air cooling. The device is IP20 rated, control cabinet mounted, and weighs approximately 7.5 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Introduced by Bosch Rexroth Indramat, the HCS02.1E-W0054-A-03-LNNN-AA drive controller has an integrated blower. This controller’s signal and load resistance lines should be routed separately to avoid interference. The product is cooled by internal air circulation. This device’s power section has a mains connection, a motor connection, a DC bus connection, and a 24 V power supply connection. The unit’s live connectors should neither be connected nor disconnected to avoid damage. It might trigger property damage due to an incorrect installation. This controller’s pre-requisites for appropriate use must be fulfilled before putting it to use.
The product needs to be programmed before it is commissioned so that the motor performs the function specific to the application. This device can be operated for single-axis and multiple-axis control and drive tasks. The unit operation is permitted in only the specified combination and configuration of components. It mustn’t be used when the maximum temperature is very high. This controller takes about 15 minutes to cool down after it is switched off. The product’s batteries must not be recharged as this can result in their leakage or an explosion. This device uses a feeded power supply. The unit comes with a touch guard and five connectors. It has high efficiency.
This controller’s operation should be executed such that it does not get overloaded. The product is compatible with third-party motors only if they fulfill the requirements given in the manual. This device’s operation should take place with its connectors plugged on. The unit uses a screw terminal block with four poles. It controls and monitors the holding brake of the motor.
Frequently Asked Questions about HCS02.1E-W0054-A-03-LNNN-AA:
Q: Where is the control section of the HCS02.1E-W0054-A-03-LNNN-AA controller located?
A: The control section of the HCS02.1E-W0054-A-03-LNNN-AA controller is located in its power section.
Q: What is the voltage rating of the live parts of the HCS02.1E-W0054-A-03-LNNN-AA controller?
A: The voltage rating of the live parts of the HCS02.1E-W0054-A-03-LNNN-AA controller is more than 50 V.
Q: What kind of power supply does the HCS02.1E-W0054-A-03-LNNN-AA controller have?
A: The HCS02.1E-W0054-A-03-LNNN-AA controller has a feeded power supply.
Q: How can the warnings of the HCS02.1E-W0054-A-03-LNNN-AA controller be cleared?
A: The warnings of the HCS02.1E-W0054-A-03-LNNN-AA controller can be cleared by clearing the conditions that caused them.
Q: What happens if the HCS02.1E-W0054-A-03-LNNN-AA controller is handled improperly?
A: If the HCS02.1E-W0054-A-03-LNNN-AA controller is handled improperly, it may pose a risk of injury.
