Product Description:

The HCS01.1E-W0054-A-03-E-S3-EC-NN-L3-NN-FW is an HCS Drive Controller manufactured by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. Classified as design version 1 and slotting into the compact HCS01 line, the unit is intended for cabinet installation where it converts three-phase mains power into precisely regulated motor current. In an automation cell, it serves as the axis-level actuator that executes velocity, torque, or position commands issued by a higher-level control. This allows the connected motor to respond consistently during starting, running, and stopping in packaging machines, material handling systems, and other production equipment.

On the communication side, the controller connects to the machine network through SERCOS III, enabling deterministic data exchange during every control cycle. That interface supports real-time command transfer and status feedback between the drive and the higher-level motion system. It accepts input voltages of 3 x AC 200...500 V ±10%, allowing the same hardware to run on both 230 V and 480 V plant supplies without a transformer. Current loops are sized for a device peak capability of 54 A, so short acceleration bursts can be handled without derating. Thermal energy is removed by internal air cooling through an integrated blower, and the housing carries an IP20 rating that protects against finger contact and requires enclosure mounting.

The drive is paired with the ECONOMY control section, which matches the required module for units with the “E” suffix. Motor feedback is processed via IndraDyn encoder feedback with Hiperface/EnDat 2.1/2.2, providing absolute position data for closed-loop control. Its power section supports infeeding and DC-bus-fed operation, permitting energy exchange on a common DC bus. Functional stopping relies on STO (Safe Torque Off) instead of mechanical relays. A second communication port is not equipped on this version.