Product Description:

The HCS01.1E-W0054-A-03-B-ET-EC-PB-L3-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. As a compact unit that combines a power stage and control electronics, it regulates torque and speed for synchronous or asynchronous motors used in material-handling lines, packaging equipment, and similar automation tasks. The product belongs to line version HCS01 and operates as a module that can feed energy into and draw energy from the DC bus of a multi-axis system.

This controller accepts a mains supply of 3 × AC 200–500 V ±10%, allowing one hardware platform to operate on both 230 V and 460 V plant power systems. During acceleration or rapid load changes, it can deliver a device peak current of 54 A, which is the maximum inverter output available for short-term dynamic events. Network connectivity is provided by MultiEthernet, and the onboard switch supports several real-time Ethernet protocols without extra option cards. Feedback from motors is read through the first encoder interface, specified as Encoder IndraDyn Hiperface/EnDat 2.1/2.2, which supports high-resolution position control and electronic nameplate transfer. Fieldbus communication with legacy PLCs is also available through a dedicated PROFIBUS port that transmits setpoints and diagnostic words at rates of up to 12 Mbit/s.

Thermal management uses internal air cooling driven by an integrated blower, so cabinet heat is expelled without external ducting. The housing carries an IP20 rating, which provides finger-safe touch protection and requires installation in a closed electrical enclosure. Functional safety is built in through a hardware-based STO channel that removes torque-forming energy to the motor when a safe stop is commanded. The paired control section is the BASIC variant, which provides standard motion functions for general drive applications.