HCS01.1E-W0054-A-03-B-ET-EC-NN-S4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911340085
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
21 Seconds
The Bosch Rexroth Indramat HCS01.1E-W0054-A-03-B-ET-EC-NN-S4-NN-FW is a drive controller from the HCS IndraDrive Controllers series. It features a MultiEthernet communication interface and supports mains voltage from 200 to 500 volts AC. The controller uses internal air cooling with an integrated blower and has a peak current of 54 Amps.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0054-A-03-B-ET-EC-NN-S4-NN-FW is a drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. As a modular controller, it regulates power flow between a three-phase mains supply and connected IndraDyn servo or spindle motors. This allows it to serve as the core of position and speed control in automated machines, packaging lines, and material-handling axes. Its role is to convert incoming electrical power into controlled motor output while supporting coordinated motion tasks.
This unit accepts a supply of 3 x AC 200…500 V ±10%, which allows operation on low- and medium-voltage industrial power systems. Peak output capability reaches 54 A, so the drive can provide short acceleration bursts without an external booster stage. Communication with PLCs is handled through MultiEthernet, allowing the drive to operate with EtherNet/IP, PROFINET IO, EtherCAT, or Sercos III through software selection. The control section identified as BASIC provides the standard motion functions and diagnostic features used for indexing axes. The housing has an IP20 rating, so the unit is intended for cabinet installation where the enclosure provides touch protection.
Motor feedback reaches the drive through the single-cable interface Encoder IndraDyn Hiperface/EnDat 2.1/2.2, which simplifies wiring and supports automatic electronic nameplate reading. The drive is Design Version 1. Thermal management uses internal air cooling through an integrated blower, so heat is released inside the cabinet without external ducting. The converter stage is classified as Infeeding / Feeded, which means power can be drawn from or regenerated back to a common DC bus. The unit uses one motor feedback connection and is configured for a BASIC control section within the HCS01 line.
Frequently Asked Questions about HCS01.1E-W0054-A-03-B-ET-EC-NN-S4-NN-FW:
Q: What communication interface does the HCS01.1E-W0054-A-03-B-ET-EC-NN-S4-NN-FW support?
A: The HCS01.1E-W0054-A-03-B-ET-EC-NN-S4-NN-FW offers a MultiEthernet communication interface for network connectivity.
Q: What type of encoder interface is available on the HCS01.1E-W0054-A-03-B-ET-EC-NN-S4-NN-FW?
A: This drive controller provides encoder feedback compatibility through IndraDyn Hiperface and EnDat 2.1/2.2 interfaces.
Q: How is the HCS01.1E-W0054-A-03-B-ET-EC-NN-S4-NN-FW cooled?
A: The cooling method for this model is internal air cooling, handled by an integrated blower.
Q: What is the peak current rating for the HCS01.1E-W0054-A-03-B-ET-EC-NN-S4-NN-FW drive controller?
A: The device has a peak current capacity of 54 A.
Q: What mains voltage range does the HCS01.1E-W0054-A-03-B-ET-EC-NN-S4-NN-FW accept?
A: The HCS01.1E-W0054-A-03-B-ET-EC-NN-S4-NN-FW supports a mains voltage of 3 x AC 200 to 500 V with a ±10% tolerance.
