Product Description:

The HCS01.1E-W0054-A-03-B-ET-EC-EP-SB-NN-AW is a drive controller from Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It supplies regulated power and closed-loop control to synchronous and induction motors used on packaging lines, gantry axes, and material-handling systems in factory automation. The controller regulates motor current, speed, and position so connected axes can follow command changes during starting, running, and stopping. This supports precise motion on machines that require repeatable axis response through demanding duty cycles.

It interfaces with PLCs through MultiEthernet, allowing deterministic traffic across PROFINET, EtherNet/IP, or EtherCAT networks. This network flexibility lets the same controller fit machines that use different plant communication standards. An input range of 3 x AC 200...500 V ±10% lets one model operate from multiple regional mains supplies without transformer changes. The controller can deliver a peak phase current of 54 A for short-term motor acceleration events. Thermal management uses internal air cooling through an integrated blower, which circulates cabinet air through the heat sink to maintain component temperature. Diagnostic and feedback data pass through a sensor port for IndraDyn Hiperface or EnDat 2.1/2.2 encoder signals, allowing high-resolution position capture. For safety, terminals and live parts sit behind an IP20 housing intended for protected cabinet installation.

The power section is paired with a BASIC control module, matching the specified configuration and supporting standard drive functions. Inside the HCS01 family, the unit is design version 1, so hardware and parameter updates must match that revision. Its integrated power-supply concept is listed as infeeding or fed operation, meaning it can supply DC-link power to other axes or draw energy from a common bus depending on system layout. In shared-bus systems, this allows power exchange between connected axes during machine operation. No optional expansion modules are installed, which keeps the configuration straightforward.