Product Description:

The HCS01.1E-W0054-A-03-B-ET-EC-EM-SB-NN-FW belongs to the HCS IndraDrive Controllers series from Bosch Rexroth Indramat. As an HCS drive controller, it supplies regulated power and motion commands to connected servo or induction motors in automated machinery, material-handling lines, and similar production equipment. The unit integrates the power section and a replaceable control section so that a single package can execute positioning, speed, and torque loops under a central PLC or fieldbus host during coordinated machine operation.

Networked communication is provided through the MultiEthernet interface, allowing EtherNet/IP, PROFINET, or EtherCAT protocols to be selected in software without extra hardware. The control section installed in this build is the BASIC variant, identified by the B code and paired at the factory for standard motion tasks. Thermal management relies on internal air cooling delivered by an integrated blower, and this method removes heat without external ducts or liquid circuits. During dynamic acceleration, the power stage can supply up to 54 A of peak output current, supporting short-term overload demand at the motor. The enclosure is rated IP20, so the controller must be mounted inside a closed electrical cabinet.

Main power is accepted from 3 × AC 200–500 V lines with a ±10% tolerance, giving flexibility for a wide range of plant supply voltages. Feedback wiring can connect to the Encoder IndraDyn Hiperface/EnDat 2.1/2.2 port, and downstream devices can use the built-in encoder emulation output for follower applications that require replicated position or speed signals. The power supply section supports infeeding and fed operation, so the controller can return braking energy to a shared DC bus or draw energy from that bus when configured as a follower.