HCS01.1E-W0054-A-03-B-ET-EC-EC-S5-NN-NW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911397285
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0054-A-03-B-ET-EC-EC-S5-NN-NW is a drive controller from the HCS IndraDrive Controllers series with a peak current of 54 Amps and an IP20 rating. It features MultiEthernet communication and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1 or 2.2. The controller uses air cooling with an integrated blower and operates with a mains voltage of 3 x AC 200 to 500 V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0054-A-03-B-ET-EC-EC-S5-NN-NW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It is installed between a three-phase supply and servo or induction motors to regulate speed and torque according to control-system commands in material handling, packaging, and machining equipment. The unit belongs to the HCS01 line and is intended to work with a compatible control section for local closed-loop motion processing. Because it sits at the power-conversion stage, it converts incoming electrical power into controlled motor output for coordinated axis movement. This role supports repeatable starts, stops, speed changes, and torque response during normal machine operation.
The power stage accepts 3 × AC 200…500 V ±10%, allowing the same hardware to operate from a wide range of industrial mains. During short acceleration events, the inverter can supply up to 54 A, which supports brief torque demands above the continuous level. The enclosure has an IP20 rating, so the controller is intended for installation inside a control cabinet rather than in open machine areas. Command and diagnostic data move through a MultiEthernet interface that supports common real-time communication protocols without additional option cards. The electronic section is specified as BASIC, providing the standard I/O and motion functions used for general-purpose applications.
Heat is removed by internal air cooling through an integrated blower, so the unit does not require external ducting. Both feedback connectors support IndraDyn Hiperface / EnDat 2.1 / 2.2 encoders, giving the controller direct compatibility with common high-resolution motor feedback systems. This native feedback support lets the drive process position and velocity signals without separate encoder interface hardware. The unit is built as Design Version 1. Its power section uses an infeeding and fed supply configuration, which allows regenerative energy to return to a shared DC bus. No additional design features are declared, and the controller is intended for indoor, dry cabinet installations.
Frequently Asked Questions about HCS01.1E-W0054-A-03-B-ET-EC-EC-S5-NN-NW:
Q: What communication interface does the HCS01.1E-W0054-A-03-B-ET-EC-EC-S5-NN-NW support?
A: The HCS01.1E-W0054-A-03-B-ET-EC-EC-S5-NN-NW supports MultiEthernet communication for network integration.
Q: What is the device peak current available on the HCS01.1E-W0054-A-03-B-ET-EC-EC-S5-NN-NW controller?
A: This model offers a peak current of 54 A for handling demanding drive tasks.
Q: How is the HCS01.1E-W0054-A-03-B-ET-EC-EC-S5-NN-NW cooled during operation?
A: It uses an internal air cooling method with an integrated blower for temperature management.
Q: What IP rating does the HCS01.1E-W0054-A-03-B-ET-EC-EC-S5-NN-NW drive controller have?
A: The HCS01.1E-W0054-A-03-B-ET-EC-EC-S5-NN-NW features an IP20 rating, providing limited protection against solid objects.
Q: What mains voltage range is supported by the HCS01.1E-W0054-A-03-B-ET-EC-EC-S5-NN-NW?
A: This unit is compatible with mains voltages of 3 x AC 200 to 500 V ±10%.
