Product Description:

The HCS01.1E-W0054-A-03-B-ET-EC-EC-S4-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It bridges the plant’s AC mains with synchronous or induction motors and performs closed-loop torque, speed, and position control for coordinated axes in material-handling and packaging lines. The housing combines power conversion, logic, and diagnostic circuitry in one unit, which helps reduce cabinet wiring and provides onboard status reporting together with fieldbus communication.

The controller exchanges motion commands and status data over a MultiEthernet interface, allowing integration into EtherNet/IP, PROFINET, or EtherCAT networks without additional hardware. Thermal management is handled by internal air cooling through an integrated blower, eliminating the need for external ducting. During rapid acceleration, the inverter can deliver a peak current of 54 A, providing headroom for transient load demands. The enclosure has an IP20 rating, so it is protected against solid objects larger than 12.5 mm and must be installed in a closed electrical cabinet. Incoming power is accepted from a three-phase supply of 3 x AC 200…500 V ±10%, allowing use on low- or medium-voltage distribution systems common in industrial facilities.

The control section is type BASIC, which covers general motion tasks without advanced optional functions. The drive is version 1 within the HCS01 line. Both encoder sockets support IndraDyn Hiperface/EnDat 2.1/2.2 feedback formats, allowing the unit to read absolute position data from compatible Rexroth motors or third-party transducers. Power exchange with the DC bus uses an infeeding and fed supply concept, so the unit can receive regenerated energy from other drives or return excess energy to the bus during axis deceleration.