HCS01.1E-W0054-A-03-A-ET-EC-NN-S5-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911384222
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
42 Seconds
The Bosch Rexroth Indramat HCS01.1E-W0054-A-03-A-ET-EC-NN-S5-NN-FW is part of the HCS IndraDrive Controllers series. This drive controller features a MultiEthernet communication interface and has a device peak current of 54 Amps. It uses air cooling with an integrated blower and comes with an IP20 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0054-A-03-A-ET-EC-NN-S5-NN-FW is a drive controller from the HCS IndraDrive Controllers series manufactured by Bosch Rexroth Indramat. It installs in a cabinet and combines power conversion with motion control logic, forming the interface between a three-phase mains supply and a servo or induction motor. By processing setpoint data from a higher-level PLC, the device supplies precisely regulated current so automated pick-and-place, packaging, and conveying axes can follow commanded speed, torque, and position profiles.
The controller communicates with supervisory equipment over MultiEthernet, allowing parameter access through PROFINET, EtherNet/IP, or EtherCAT without extra hardware. Its power stage accepts a supply of 3 x AC 200...500 V ±10%, a range that covers global low- and medium-voltage plants. Momentary load surges can be handled because the device peak current reaches 54 A. An IP20 housing permits installation inside closed electrical enclosures where live parts remain protected from accidental contact. Thermal energy is removed by internal air cooling that relies on an integrated blower, so no external ducts or liquid circuits are required. The closed housing and built-in airflow suit standard industrial control cabinets.
The unit is version 1. Motor feedback is processed through the dedicated Encoder IndraDyn Hiperface/EnDat 2.1/2.2 interface, while a second feedback port is left vacant for single-encoder axes. Within the broader HCS01 line, this model uses an infeed/feedback power topology, allowing it to share DC-bus energy with adjacent drives and return regenerative power to the supply during braking. The controller is paired with a BASIC control section, which supports standard motion tasks without adding extra interface hardware.
