Product Description:

The HCS01.1E-W0054-A-03-A-CC-EC-PB-L3-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It governs servo and induction motors in modular automation lines, providing closed-loop motion control for packaging, material handling, and processing equipment. The unit is intended for coordinated axes where the drive must regulate speed, torque, and position while exchanging status data with the machine controller. Its compact controller format is designed for installation inside an electrical cabinet rather than direct exposure on the machine.

The controller communicates with higher-level PLCs through a SERCOS III master (cross communication) port, allowing cyclic setpoints and diagnostics over a real-time network. Its control section is the ADVANCED type, which supports multi-axis coordination and internal parameter storage. Thermal management uses internal air cooling through an integrated blower, so the drive does not require a separate external cooling assembly. The power stage can supply up to 54 A of peak output current for short acceleration periods, and the housing has an IP20 protection rating, which makes it suitable for enclosed installation. The supply accepts 3 x AC 200–500 V ±10%, allowing direct connection to a wide range of three-phase mains systems.

For legacy fieldbus connections, the base unit includes a PROFIBUS port that can operate at the same time as the SERCOS channel. Encoder input supports IndraDyn Hiperface and EnDat 2.1 or 2.2 feedback, allowing absolute position data from Bosch Rexroth and third-party motors. Functional safety is integrated through STO (Safe Torque Off), which removes motor torque on demand without external relays. Power is exchanged through the DC bus, so the converter can return regenerative energy to a common supply or draw from it as needed. This unit is design version 1 and belongs to the HCS01 line.