Product Description:

The HCS01.1E-W0054-A-03-A-CC-EC-NN-S5-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat and supplied within the HCS IndraDrive Controllers series. As an HCS Drive Controller, it modulates current and voltage for synchronous or induction motors used in packaging lines, material-handling axes, and general factory automation. The device works under a higher-level PLC to execute motion commands and supports closed-loop operation with motor feedback for accurate speed and position control. This arrangement allows the controller to regulate torque, speed, and position on machine axes that require repeatable motion.

In the power stage, the unit can deliver a device peak current of 54 A, enabling short acceleration bursts without an immediate thermal trip. It operates from a three-phase supply of 3 × AC 200…500 V ±10 %, so one model can be used on many common industrial mains. Protection against solid objects is limited by the housing’s IP20 rating, so cabinet installation is required. Axis coordination is handled over a SERCOS III master cross-communication link, and the power section is paired with the Control Section Design type ADVANCED, which supports motion control functions such as safe torque off.

Internal thermal management is handled by air cooling through an integrated blower, so the controller does not rely on an external heat sink for normal operation. Feedback wiring connects to a single encoder port that supports IndraDyn Hiperface/EnDat 2.1 / 2.2 protocols, while the second feedback slot is not equipped. Because only one encoder interface is fitted, the controller is intended for applications that do not require an additional feedback channel. The unit is identified as Design Version 1. Its power supply arrangement is classified as infeeding or fed operation, which allows use in system topologies that either draw energy from the mains or return energy to the supply path.