HCS01.1E-W0054-A-03-A-CC-EC-ET-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911336457
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0054-A-03-A-CC-EC-ET-NN-NN-FW is part of the HCS IndraDrive Controllers series and is designed as an ADVANCED control type drive controller. It supports a device peak current of 54 Amps and operates on a mains voltage range of 3 x AC 200 to 500 Volts. The controller features SERCOS III master cross communication, MultiEthernet, and encoder interfaces such as IndraDyn Hiperface or EnDat 2.1/2.2, with an IP20 rating and air cooling via an internal blower.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0054-A-03-A-CC-EC-ET-NN-NN-FW is a drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It serves as the central converter in multi-axis automation by conditioning three-phase mains power, executing motion commands, and supplying regulated current to connected IndraDyn motors. By combining control and power electronics in one housing, the unit helps simplify cabinet layouts in packaging, printing, and material-handling machines.
The controller operates from a three-phase supply of 200–500 V AC, allowing use on low- or medium-voltage plant power systems without an external transformer. During rapid acceleration or regenerative braking, it can deliver up to 54 A of peak current to the load, which supports demanding axis movements. Protection is rated at IP20, so the device is intended for installation inside an enclosed cabinet. Deterministic motion exchange is handled through SERCOS III, which supports cross-communication among multiple IndraDrive controllers. A second port marked MultiEthernet allows access through EtherNet/IP, PROFINET, or TCP/IP service channels, and the unit is design version 1 of the HCS01 line without a dedicated safety interface.
This power section is paired with an ADVANCED control section, providing extended processing capability for multi-axis interpolation and onboard PLC functions. Thermal management relies on an integrated blower that moves air through the heat sink, so no external fan is required for normal cooling. For position feedback, Interface 1 supports IndraDyn single-cable encoders and EnDat 2.2, allowing high-resolution absolute position data to reach the drive without separate converter modules. Power can be fed back to a common DC bus because the supply stage is configured for infeeding and power-feed operation, which allows surplus braking energy to be shared with other axes or returned to the grid.
Frequently Asked Questions about HCS01.1E-W0054-A-03-A-CC-EC-ET-NN-NN-FW:
Q: What is the maximum peak current supported by the HCS01.1E-W0054-A-03-A-CC-EC-ET-NN-NN-FW controller?
A: The HCS01.1E-W0054-A-03-A-CC-EC-ET-NN-NN-FW supports a peak device current of 54 A, accommodating high power demands.
Q: What mains voltage range does the HCS01.1E-W0054-A-03-A-CC-EC-ET-NN-NN-FW controller accept?
A: This model is compatible with a three-phase AC mains voltage supply ranging from 200 to 500 V plus or minus 10%.
Q: How is the HCS01.1E-W0054-A-03-A-CC-EC-ET-NN-NN-FW cooled during operation?
A: Internal cooling is achieved through an integrated blower, maintaining temperature without needing external ventilation.
Q: What communication interface is available on the HCS01.1E-W0054-A-03-A-CC-EC-ET-NN-NN-FW controller?
A: The HCS01.1E-W0054-A-03-A-CC-EC-ET-NN-NN-FW provides a SERCOS III master interface for streamlined cross communication between devices.
Q: What IP protection rating does the HCS01.1E-W0054-A-03-A-CC-EC-ET-NN-NN-FW offer?
A: This controller meets the IP20 rating, offering basic protection against solid objects greater than 12 mm.
