Product Description:

The HCS01.1E-W0054-A-03-A-CC-EC-EC-NN-NN-FW is a drive controller produced by Bosch Rexroth Indramat as part of the HCS IndraDrive Controllers series. It supplies regulated power to servo axes and interprets encoder feedback. It also exchanges motion commands with higher-level automation so packaging stations, handling robots, or tooling spindles follow precise speed and torque profiles. Its control architecture supports closed-loop motion in systems that require repeatable response during changing load conditions.

This unit links to neighboring drives and the machine PLC through the SERCOS III master interface, a deterministic Ethernet layer that carries position data and synchronization telegrams. The control section is classified as ADVANCED, which supports extended motion functions such as cross-communication and gantry coupling. Heat is removed by internal air cooling generated by an integrated blower, allowing cabinet installation without external ducting. A device peak current of 54 A lets the inverter handle short-term acceleration demands without saturation. The permissible mains window of 3 x AC 200...500 V ±10% covers common low- and medium-voltage factory networks used worldwide.

The housing carries an IP20 rating, so the unit is intended for protected electrical enclosures rather than direct exposure to dust or liquids. Hardware is released as Design Version 1. The power section supports infeeding and fed operation, allowing the drive to share a common DC bus with companion units during braking or acceleration cycles. Motor feedback arrives on two identical ports that accept IndraDyn Hiperface or EnDat 2.1/2.2 encoder signals, giving the axis high-resolution position data without extra adapter cards. Functional safety is not built in, so any required safety functions must be provided by external devices.