HCS01.1E-W0054-A-03-A-CC-EC-DA-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911347696
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0054-A-03-A-CC-EC-DA-NN-NN-FW is part of the HCS IndraDrive Controllers series and is designed as an ADVANCED control section. This drive controller has a peak current rating of 54 Amps and supports a mains voltage range of 3 x AC 200 to 500 Volts. It offers a SERCOS III master communication interface and comes with IP20 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0054-A-03-A-CC-EC-DA-NN-NN-FW is an HCS drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It serves as the power and control interface between a plant's CNC or PLC and attached synchronous or asynchronous servo motors, adjusting speed, torque, and position for automated machinery. This allows the unit to support coordinated axis movement in handling systems, machine tools, and other equipment that depends on closed-loop motion control. The power stage accepts 3 x AC 200...500 V ±10% mains, which allows operation on a wide range of three-phase supply systems.
The controller exchanges cyclic data with higher-level control systems through a SERCOS III master with cross communication link, and this arrangement also supports drive-to-drive data exchange on the ring. This communication path supports synchronized command transfer and status reporting during multi-axis operation. Thermal management is handled by internal air cooling through an integrated blower, so the fan moves air through the heat sink without external ducting. During acceleration or braking, the inverter can source up to 54 A of peak phase current for short-term demand. The enclosure has an IP20 rating, so the unit is finger-safe but requires installation inside a protected cabinet. This module belongs to the HCS01 line and is identified as design version 1.
The plug-in control section supplied for this power module is the ADVANCED type, which provides extended motion functions and added diagnostic capability. Motor feedback enters through the IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, allowing compatible encoder signals to be processed by the drive. DC bus handling uses an infeeding and feeding topology, so recovered energy can return to the supply network or be shared on a common DC link. The unit is not equipped with a safety interface, so any required safety functions must be provided by external hardware. This control section is intended for use with the present power module.
Frequently Asked Questions about HCS01.1E-W0054-A-03-A-CC-EC-DA-NN-NN-FW:
Q: Which communication interface does the HCS01.1E-W0054-A-03-A-CC-EC-DA-NN-NN-FW use?
A: The HCS01.1E-W0054-A-03-A-CC-EC-DA-NN-NN-FW supports communication via SERCOS III master with cross communication capabilities.
Q: What is the cooling method used in the HCS01.1E-W0054-A-03-A-CC-EC-DA-NN-NN-FW controller?
A: This drive controller is equipped with an internal air cooling system that utilizes an integrated blower for thermal management.
Q: What is the peak current rating of the HCS01.1E-W0054-A-03-A-CC-EC-DA-NN-NN-FW?
A: The device offers a peak current of 54 A for demanding applications requiring high current.
Q: What is the supported mains voltage range for the HCS01.1E-W0054-A-03-A-CC-EC-DA-NN-NN-FW?
A: This controller operates at a mains voltage of 3-phase AC 200 to 500 V with a tolerance of plus or minus 10%.
Q: What level of environmental protection is provided by the HCS01.1E-W0054-A-03-A-CC-EC-DA-NN-NN-FW's IP rating?
A: The HCS01.1E-W0054-A-03-A-CC-EC-DA-NN-NN-FW has an IP20 protection rating, which limits protection against solid objects and does not guard against liquids.
