Product Description:

The HCS01.1E-W0054-A-03-A-CC-EC-CN-NN-NN-FW is a drive controller produced by Bosch Rexroth Indramat in the HCS IndraDrive Controllers series. It serves as the power and motion regulator in multi-axis automation, converting three-phase mains energy into precisely timed current for synchronous or induction motors. Within an IndraDrive stack, it closes the torque, speed, and position loops commanded by higher-level PLCs, so equipment such as packaging stations, pick-and-place gantries, and conveyor lines can synchronize movement with machine logic. This allows coordinated starting, stopping, and positioning across linked machine sections without separate motion hardware at each axis.

Its device peak current reaches 54 A, allowing short bursts that handle rapid load acceleration without exceeding silicon limits. The input section accepts 3 x AC 200 to 500 V ±10%, so one model can operate on both 230 V and 400 V plant grids. Real-time motion data moves over the integrated SERCOS III master, enabling deterministic cross-communication between multiple drives for coordinated axis control. Temperature rise is limited by internal air cooling, which forces cabinet air across the heat sink with an onboard blower and avoids external ducting hardware. This arrangement supports compact cabinet layouts where airflow has to be managed inside the enclosure.

The housing carries an IP20 rating, which is finger-safe but relies on the control panel for dust and moisture protection. Motor feedback is connected through the multi-protocol IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, supplying absolute position data directly to the control loop. A secondary fieldbus named CANopen provides parameter access and decentralized I/O options alongside SERCOS. The installed control section is the Advanced variant, which provides extra processing capacity for complex motion tasks, and power is managed by an infeeding and fed supply concept that allows several drives on the DC link to share regenerated energy. The separate communication and feedback paths let the drive manage closed-loop motion while also supporting distributed machine functions.