Product Description:

The HCS01.1E-W0030A-02-B-ET-S4-NN-FW is an HCS Drive Controller manufactured by Bosch Rexroth Indramat and supplied within the HCS IndraDrive Controllers series. As a compact drive controller, it coordinates torque, speed, and position loops for servo and induction motors in industrial automation cells. The device combines power conversion, control logic, and network connectivity in one housing, which helps reduce panel space on single-axis or distributed machine sections. That makes it suitable for packaging, handling, and general-purpose automation equipment that depends on repeatable axis behavior.

The controller uses a Multi-Ethernet communication interface, allowing it to connect to EtherNet/IP, PROFINET, and EtherCAT networks without additional hardware. A front-mounted standard operator panel provides parameter entry and basic diagnostics directly at the cabinet. Internally, the control section is the Basic variant, which supports standard motion functions while a separate module handles advanced safety tasks. The power stage operates from a three-phase supply of 3 × AC 110…230 V, which supports installation on low-voltage mains. The IP20 housing is finger-safe, but the unit still requires installation inside a closed electrical enclosure to limit exposure to dust and moisture.

The electronic design is version 1, and heat is removed by internal air cooling through an integrated blower, so no external ducting is required. Within the HCS01 line, the device uses the smallest frame size, which helps conserve cabinet space where only one axis is needed. DC power can be shared over a common bus because the integrated supply is the infeeding / fed type, allowing regenerated energy to be exchanged with adjacent drives. Motion monitoring is handled by the built-in Safe Motion function, which supervises velocity and standstill in accordance with functional safety standards. This arrangement supports compact installations that still require coordinated control and monitored stopping behavior.