HCS01.1E-W0028-A-03-A-ET-EC-NN-L3-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911377960
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0028-A-03-A-ET-EC-NN-L3-NN-FW is part of the HCS IndraDrive Controllers series. This HCS drive controller has a device peak current of 28 Amps and supports MultiEthernet communication. It features an IP20 rating, an integrated blower for air cooling, and an STO safety interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0028-A-03-A-ET-EC-NN-L3-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It serves as the power section of an automation axis, converting three-phase mains power into regulated motor current for servo and induction applications. The compact housing, wiring terminals, and diagnostic LEDs are arranged for cabinet installation, where clear access and quick status checking are useful. This layout suits packaging lines, material-handling gantries, and similar equipment that depend on controlled axis motion.
A MultiEthernet port provides one network interface for PROFINET, EtherNet/IP, or EtherCAT communication, which simplifies PLC connection. The power stage can reach a device peak current of 28 A, allowing short acceleration bursts before overload limiting is reached. Its input accepts 3 x AC 200…500 V ±10%, so the same unit can operate from either lower-voltage or higher-voltage plant supplies within that range. Thermal management uses internal air cooling through an integrated blower that draws cabinet air across the heat sink, so no external ducting is required. The enclosure has an IP20 rating, which provides finger-safe protection when the controller is installed inside an enclosed panel.
Functional safety is provided by the hardware-based STO interface, which removes torque-producing power to the motor without switching the main contactor. The unit is Design Version 1. Feedback signals are accepted through a configurable IndraDyn, Hiperface, or EnDat 2.1/2.2 channel, while Interface 2 remains unassigned when secondary feedback is not required. The DC bus supports infeed/feed operation, allowing the controller to act as a power source or a consumer on a common bus. It pairs with the BASIC control section, code B, for parameter processing.
Frequently Asked Questions about HCS01.1E-W0028-A-03-A-ET-EC-NN-L3-NN-FW:
Q: What communication interface is available on the HCS01.1E-W0028-A-03-A-ET-EC-NN-L3-NN-FW controller?
A: The HCS01.1E-W0028-A-03-A-ET-EC-NN-L3-NN-FW controller supports MultiEthernet communication for flexible network integration.
Q: How is the HCS01.1E-W0028-A-03-A-ET-EC-NN-L3-NN-FW controller cooled?
A: This model uses air cooling with an internal blower to regulate its operating temperature.
Q: What is the peak current supported by the HCS01.1E-W0028-A-03-A-ET-EC-NN-L3-NN-FW controller?
A: The device features a peak current capability of 28 A for demanding applications.
Q: What type of encoder interfaces does the HCS01.1E-W0028-A-03-A-ET-EC-NN-L3-NN-FW support?
A: The primary encoder interface on this controller is compatible with IndraDyn Hiperface and EnDat 2.1/2.2 encoders.
Q: What is the IP rating of the HCS01.1E-W0028-A-03-A-ET-EC-NN-L3-NN-FW controller?
A: The HCS01.1E-W0028-A-03-A-ET-EC-NN-L3-NN-FW is rated at IP20, providing basic protection against solid objects.
