HCS01.1E-W0028-A-03-A-ET-EC-EM-S4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911377563
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0028-A-03-A-ET-EC-EM-S4-NN-FW is part of the HCS IndraDrive Controllers series. This HCS drive controller has a MultiEthernet communication interface and operates with a device peak current of 28 Amps. It features air cooling through an internal integrated blower and is rated at IP20, with support for encoder interfaces including IndraDyn Hiperface and EnDat 2.1 or 2.2.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0028-A-03-A-ET-EC-EM-S4-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It supplies regulated three-phase power to synchronous or asynchronous motors and exchanges motion commands with higher-level control systems during single-axis operation. The unit is intended for cabinet installation, where its compact format supports machines that need integrated motor control without a large drive footprint. It belongs to the HCS01 product line and is used where precise speed and motion control are required.
A communication backplane with MultiEthernet allows direct connection to EtherNet/IP, PROFINET, and other Ethernet-based fieldbuses without separate option cards. Thermal management uses internal air cooling, which moves air across heat-producing components through an integrated blower and removes the need for external ducting. The controller accepts an input supply range of 3 x AC 200…500 V ±10%, so it can operate on a wide range of industrial mains systems. For short acceleration events, the drive can deliver transients of up to 28 A to the motor. The enclosure has an IP20 rating, so the controller must be installed inside a suitable cabinet to protect it from dust and contact.
Feedback handling is split between two interfaces. Interface 1 supports absolute or incremental signals through IndraDyn Hiperface / EnDat 2.1 / 2.2, giving the controller compatibility with several common motor feedback formats. Interface 2 provides encoder emulation for downstream monitoring or signal distribution. The power stage can exchange regenerated energy with the DC bus, depending on the system topology. The controller is built as version 1 and uses the BASIC control section B, which provides parameter memory and motion logic without the extended option set.
Frequently Asked Questions about HCS01.1E-W0028-A-03-A-ET-EC-EM-S4-NN-FW:
Q: What communication interface does the HCS01.1E-W0028-A-03-A-ET-EC-EM-S4-NN-FW use?
A: The HCS01.1E-W0028-A-03-A-ET-EC-EM-S4-NN-FW controller supports MultiEthernet communication interfaces for network connectivity.
Q: How is the HCS01.1E-W0028-A-03-A-ET-EC-EM-S4-NN-FW cooled?
A: This drive controller uses an internal air cooling method with an integrated blower for temperature regulation.
Q: What is the peak current rating for the HCS01.1E-W0028-A-03-A-ET-EC-EM-S4-NN-FW?
A: The peak current supported by this device is 28 A.
Q: What type of encoder interface does the HCS01.1E-W0028-A-03-A-ET-EC-EM-S4-NN-FW have?
A: The main encoder interface accepts IndraDyn Hiperface and EnDat 2.1/2.2 signals.
Q: What is the mains voltage requirement for the HCS01.1E-W0028-A-03-A-ET-EC-EM-S4-NN-FW?
A: This model is designed for operation with a mains supply of 3 x AC 200...500 V ±10%.
