Product Description:

The HCS01.1E-W0028-A-03-A-ET-EC-DA-L3-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It occupies a small control cabinet footprint and supplies the power conversion and logic needed to run synchronous or induction motors in automated lines. Its compact format fits installations where panel space is limited but coordinated motor control is still required. When paired with a BASIC control section, the unit serves as the central actuator stage that receives motion commands and returns status data for packaging, handling, and general machinery.

The controller links directly to plant networks through a MultiEthernet interface, allowing TCP-based protocols such as EtherNet/IP or PROFINET to share the same port. Protection against accidental contact is provided by the IP20 enclosure rating, which suits the device for closed electrical cabinets. Incoming mains can range from 3 × AC 200…500 V with a ±10% tolerance, and the internal converter accepts this span without derating. The device can deliver a peak output current of 28 A for brief load swings before the current regulator folds back. Thermal management uses internal air cooling from an integrated blower, so no external ducting is required during continuous duty.

A feedback connection for an IndraDyn Hiperface/EnDat 2.1/2.2 encoder is provided on interface 1, allowing absolute-position transducers to close the servo loop with high resolution. The product belongs to line code HCS01, and its safety circuitry provides a hardware-based STO function that removes torque-producing energy when triggered. The DC link is supplied through an infeeding or DC-bus-fed power module, which supports shared bus architectures in multi-axis systems and allows connected axes to use common power infrastructure.