Product Description:

The HCS01.1E-W0028-A-03-A-CC-EC-PB-S4-NN-FW is a drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It integrates the power electronics and control logic needed to manage AC servo or induction motors inside automated production lines. By issuing torque and velocity commands and processing feedback in real time, the unit supports coordinated multi-axis motion in packaging machines, handling systems, and material-processing equipment. This makes it suitable for synchronized transport, indexing, and speed-controlled machine functions where repeatable motion is required.

Its power stage accepts a mains feed of 3 x AC 200...500 V ±10% and can supply up to 28 A of peak current during rapid acceleration or brief overloads. Heat is expelled through internal air cooling that uses an integrated blower, eliminating the need for external ducting. Command and synchronization data move across the drive network through the SERCOS III master interface, which supports real-time cross-communication among drives. Machine-level status and diagnostics can also be passed to PLCs over PROFIBUS, so the controller can exchange motion data and supervisory information on separate communication paths.

This variant carries the ADVANCED control section and is housed in a touch-safe enclosure rated at IP20 for installation inside control cabinets. An infeeding and fed power supply concept lets the device return regenerated energy to the DC bus or draw it from a common source during operation. Motor position feedback enters on Interface 1 through the Hiperface/EnDat 2.1/2.2 encoder channel, supporting high-resolution commutation and closed-loop motor control. The controller belongs to line HCS01 and corresponds to design version 1, and its enclosure is intended for cabinet mounting where live parts remain shielded during normal operation.