HCS01.1E-W0028-A-03-A-CC-EC-ET-L4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911337561
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0028-A-03-A-CC-EC-ET-L4-NN-FW is an HCS IndraDrive Controller with a peak current of 28 Amps and an IP20 rating. This controller has built-in SERCOS III master communication, MultiEthernet interface, and supports encoder connections such as IndraDyn Hiperface and EnDat 2.1/2.2. It features an ADVANCED control section and provides STO and SBC safety interfaces, with cooling provided by an internal integrated blower.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0028-A-03-A-CC-EC-ET-L4-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It belongs to the HCS01 line and is used as the power and control stage for servo axes in automated machinery. In operation, the module receives motion commands from a higher-level controller and regulates motor power so that connected axes can accelerate, decelerate, and hold position accurately. It also supports shared DC-bus operation, allowing regenerated energy from one axis to be used by another axis on the same system.
The power stage accepts a three-phase supply of 3 x AC 200...500 V ±10%. It can provide up to 28 A of peak current to the connected motor during short load changes and dynamic motion events. Heat is removed by internal air cooling through an integrated blower, which keeps the power electronics ventilated inside the controller. Command and diagnostic data are exchanged over SERCOS III master with cross communication, supporting synchronized motion between axes on the network. The installed control section uses the ADVANCED design type. For functional safety, the unit includes STO (Safe Torque Off) and SBC (Safe Brake Control). The housing has an IP20 protection rating, so the controller must be installed inside an enclosure that prevents accidental contact with live parts.
For network flexibility, the drive includes MultiEthernet connectivity, allowing selection of EtherNet/IP, PROFINET, or EtherCAT. Motion feedback is handled through an IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, which supports compatible motor feedback systems and single-cable technology. The power circuit supports both infeeding and fed operation, so braking energy can return to the DC link instead of being dissipated locally. Design version 1 indicates the initial hardware release, and the standard panel format keeps the unit suitable for typical HCS01 cabinet layouts.
Frequently Asked Questions about HCS01.1E-W0028-A-03-A-CC-EC-ET-L4-NN-FW:
Q: What communication interface does the HCS01.1E-W0028-A-03-A-CC-EC-ET-L4-NN-FW use?
A: The HCS01.1E-W0028-A-03-A-CC-EC-ET-L4-NN-FW supports a SERCOS III master interface for cross communication.
Q: How is the HCS01.1E-W0028-A-03-A-CC-EC-ET-L4-NN-FW drive controller cooled?
A: This drive controller uses air cooling with an integrated blower for temperature control.
Q: What is the peak current capacity of the HCS01.1E-W0028-A-03-A-CC-EC-ET-L4-NN-FW?
A: The peak current supported by this device is 28 A.
Q: Which safety features are implemented in the HCS01.1E-W0028-A-03-A-CC-EC-ET-L4-NN-FW?
A: The safety interface includes Safe Torque Off (STO) and Safe Brake Control (SBC) features.
Q: What is the IP rating of the HCS01.1E-W0028-A-03-A-CC-EC-ET-L4-NN-FW drive controller?
A: This unit has an IP20 rating, meaning it is protected against solid objects greater than 12 mm but not against water.
