Product Description:

The HCS01.1E-W0028-A-03-A-CC-EC-EC-SB-NN-FW drive controller is built by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. Within an automation cell, it interfaces the plant supply with synchronized servo axes and executes velocity and torque commands from a central motion program. The controller manages power conversion and closed-loop regulation for IndraDyn feedback devices used on conveyors, pick-and-place gantries, and similar production equipment. This role allows the unit to support coordinated motion where accurate response to command changes is required across multiple axes.

This model accepts a three-phase mains range of 3 × AC 200…500 V ±10%, allowing use on international grids without rewiring. Protection against accidental contact is classified as IP20, so the unit must be installed inside a cabinet. Heat is removed by internal air cooling through an integrated blower, which circulates air through the drive without external ducting. Peak current capability reaches 28 A, giving short-term headroom for rapid acceleration before current limiting intervenes. Real-time coordination with adjacent drives is handled through a SERCOS III master cross-communication channel over fiber or copper, and two encoder ports support IndraDyn Hiperface and EnDat 2.1 or 2.2 feedback devices for high-resolution position control.

The control electronics that plug into this power section are identified as type ADVANCED, which provides extended PLC kernel functions. Supply link management supports infeeding or fed operation, so the unit can either source DC-bus energy to the array or operate from a common supply. The drive is design version 1, and it belongs to the HCS01 line. This arrangement supports shared DC-bus layouts in multi-axis systems while keeping the control and power sections matched to the intended platform.