Product Description:

The HCS01.1E-W0028-A-03-A-CC-EC-CN-NN-NN-FW is a drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. Designed for cabinet installation, it belongs to the compact HCS01 hardware line and manages torque, speed, and position loops for servo axes in automated machinery. By converting three-phase mains power into regulated motor currents and exchanging motion commands over deterministic fieldbus links, the controller connects motors, sensors, and higher-level PLCs in coordinated motion systems. This operating role suits indexing axes, feed units, and other machine functions that require responsive closed-loop control during changing load conditions.

The power stage accepts 3 x AC 200...500 V ±10% and can deliver a device peak current of 28 A for medium-power IndraDyn motors across a broad industrial supply range. Heat from the IGBT module is removed by internal air cooling with an integrated blower, so external ductwork is not required and cabinet air can be managed through normal enclosure ventilation. The housing has an IP20 protection rating, so the unit must be mounted inside a closed panel to prevent contact with internal components. Command and diagnostic data are exchanged over the real-time SERCOS III master interface, which supports synchronized communication and cross-communication between multiple drives on the network.

The control section is classified as ADVANCED, which adds extended motion functions and faster processing for more demanding axis tasks. The encoder port supports Encoder IndraDyn Hiperface/EnDat 2.1/2.2 feedback devices, allowing the controller to work with common digital motor feedback formats used on compatible servo systems. Auxiliary I/O and parameter access can be routed over CANopen, which provides a separate channel for integration with supporting automation devices. The power interface uses an infeeding/fed DC link for common bus operation, and the hardware is Design Version 1.