HCS01.1E-W0018-A-03-E-S3-EC-NN-NN-NN-AW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911401460
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0018-A-03-E-S3-EC-NN-NN-NN-AW is part of the HCS IndraDrive Controllers series and has an IP20 rating. This drive controller features a SERCOS III communication interface, a device peak current of 18 Amps, and ECONOMY control section design. It is cooled internally with an integrated air blower and supports a mains voltage of 3-phase AC 200 to 500 Volts plus or minus 10 percent.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-03-E-S3-EC-NN-NN-NN-AW drive controller is produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. This version 1 unit combines a three-phase power stage, control logic, and fieldbus communication in a 65 mm wide module that clips onto a DIN rail. Within industrial automation cells, it forms the closed-loop element that converts digital motion commands into regulated current for servo and induction motors, enabling coordinated positioning, speed holding, and torque regulation across packaging, printing, and assembly equipment.
The unit links to master PLCs over SERCOS III, giving deterministic 62.5 µs update cycles for motion profiles. It accepts 3 x AC 200...500 V ±10% at the input, so facilities operating on 230 V or 460 V networks can use the same hardware. The inverter section supplies up to 18 A of peak current during acceleration or dynamic braking events. Heat generated by the IGBTs is removed by internal air cooling through an integrated blower, removing the need for external ducting. An IP20 housing helps prevent accidental contact with live parts while remaining slim enough for dense panel layouts.
The plug-on control section delivered with this power module is the ECONOMY variant, which is intended for standard motion tasks that do not require an integrated PLC or extended I/O. Feedback processing is handled through IndraDyn Hiperface/EnDat 2.1/2.2 encoder feedback, letting the drive read absolute rotor positions at up to 16-bit resolution. As part of the HCS01 family, the device shares a common DC bus, and its internal supply supports infeeding and fed operation, allowing surplus regenerative energy from neighboring axes to be reused. A second encoder port and the safety interface are not included, which simplifies wiring.
Frequently Asked Questions about HCS01.1E-W0018-A-03-E-S3-EC-NN-NN-NN-AW:
Q: What type of communication interface does the HCS01.1E-W0018-A-03-E-S3-EC-NN-NN-NN-AW controller use?
A: The HCS01.1E-W0018-A-03-E-S3-EC-NN-NN-NN-AW uses a SERCOS III interface for communication.
Q: How is cooling achieved in the HCS01.1E-W0018-A-03-E-S3-EC-NN-NN-NN-AW drive controller?
A: The cooling is provided internally via an integrated blower for efficient air circulation.
Q: What is the peak current rating for the HCS01.1E-W0018-A-03-E-S3-EC-NN-NN-NN-AW?
A: This controller has a maximum peak current capability of 18 A.
Q: Which encoder interfaces are available on Interface 1 of this drive controller?
A: IndraDyn Hiperface and EnDat 2.1/2.2 encoders are supported as the primary interface for feedback.
Q: What is the IP rating of the HCS01.1E-W0018-A-03-E-S3-EC-NN-NN-NN-AW controller?
A: The HCS01.1E-W0018-A-03-E-S3-EC-NN-NN-NN-AW is rated at IP20 for ingress protection.
