HCS01.1E-W0018-A-03-A-CC-EC-NN-S4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911344981
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0018-A-03-A-CC-EC-NN-S4-NN-FW is part of the HCS IndraDrive Controllers series. This HCS drive controller features an ADVANCED control section design and a SERCOS III master communication interface. It is cooled by an internal integrated blower and operates with a peak current of 18 Amps at a mains voltage of 3 x AC 200 to 500 V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-03-A-CC-EC-NN-S4-NN-FW is a compact drive controller from Bosch Rexroth Indramat in the HCS IndraDrive Controllers series. It is used in industrial automation to regulate power for synchronous or asynchronous servo axes, forming the link between motion commands and the connected motors. The unit combines a power section and a control section in one housing, so it can position, ramp, and stop loads without requiring a separate converter stage. This arrangement helps keep the drive system compact while supporting closed-loop axis control.
This controller operates on a three-phase supply of 3 × AC 200–500 V ±10%, which allows use across a broad range of industrial mains systems. Its device peak current reaches 18 A, so the unit can support short acceleration demands before current limiting intervenes. Thermal management uses internal air cooling through an integrated blower to move heat away from the power section. The enclosure has an IP20 rating, so it is intended for installation inside a control cabinet rather than direct exposure to dust or liquids. Motion commands and status data are exchanged through a SERCOS III master interface, which also supports real-time communication between connected drives.
The first encoder input accepts Encoder IndraDyn Hiperface/EnDat 2.1/2.2 signals, allowing high-resolution motor feedback for precise position control. The second feedback bay is not equipped, which suits applications that need only one sensor channel. The unit is Design Version 1 and uses the ADVANCED control platform for expanded motion functions. It can support coordinated features such as electronic gearing, camming, and additional control options when the application requires them. Power is shared through a common DC bus, so multiple drives in the same system can operate from a linked power structure without separate infeed hardware for each axis.
Frequently Asked Questions about HCS01.1E-W0018-A-03-A-CC-EC-NN-S4-NN-FW:
Q: What communication interface is used by the HCS01.1E-W0018-A-03-A-CC-EC-NN-S4-NN-FW?
A: The HCS01.1E-W0018-A-03-A-CC-EC-NN-S4-NN-FW supports SERCOS III master with cross communication as its main interface.
Q: What is the device peak current for the HCS01.1E-W0018-A-03-A-CC-EC-NN-S4-NN-FW?
A: The maximum peak current for this drive controller is 18 A.
Q: How is the HCS01.1E-W0018-A-03-A-CC-EC-NN-S4-NN-FW cooled?
A: Cooling is handled internally through an integrated blower using air.
Q: What mains voltage range does the HCS01.1E-W0018-A-03-A-CC-EC-NN-S4-NN-FW accept?
A: This unit supports a mains voltage input of 3 x AC 200...500 V with a ±10% tolerance.
Q: What is the IP rating of the HCS01.1E-W0018-A-03-A-CC-EC-NN-S4-NN-FW drive controller?
A: The HCS01.1E-W0018-A-03-A-CC-EC-NN-S4-NN-FW is rated at IP20 for ingress protection, suitable for indoor installation.
