HCS01.1E-W0018-A-03-A-CC-EC-NN-L3-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911338190
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0018-A-03-A-CC-EC-NN-L3-NN-FW is part of the HCS IndraDrive Controllers series and features a SERCOS III master communication interface. This advanced HCS drive controller has an internal air cooling method, operates with a peak current of 18 Amps, and includes an STO safety interface. It supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2, and is rated at IP20 for protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-03-A-CC-EC-NN-L3-NN-FW is a drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. As a member of the HCS01 line, the unit works as the power and control interface between an AC mains supply and synchronous or induction motors used in automated machinery. Within an automation cell, it regulates motor torque and speed while exchanging status data with higher-level motion systems. This arrangement allows one compact unit to convert incoming electrical power into controlled motor output for precise speed-regulated and positioning tasks.
Incoming power is accepted across a three-phase supply of 3 x AC 200...500 V ±10%, allowing the controller to operate from common industrial voltage ranges. Under dynamic load, the power section can deliver a device peak current of 18 A, which supports short-term torque demand during acceleration or braking. Component heat is removed by internal air cooling through an integrated blower, and the housing has an IP20 rating for installation inside closed electrical enclosures. Motor position feedback is handled through an IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, allowing compatibility with supported feedback systems without extra interface cards. This combination supports cabinet-mounted use where touch protection is needed at the unit, while the surrounding enclosure provides the required external protection.
Axis coordination is handled over the SERCOS III master with cross communication bus, giving deterministic data exchange with neighboring drives and the machine PLC. The controller uses the ADVANCED control section and is matched with Design Version 1 power sections in the HCS01 family. A dedicated safety terminal provides STO (Safe Torque Off), so the motor can be electrically isolated without removing mains power. That configuration supports coordinated multi-axis motion where timing between drives is important, and a secondary interface is not installed.
Frequently Asked Questions about HCS01.1E-W0018-A-03-A-CC-EC-NN-L3-NN-FW:
Q: What communication interface does the HCS01.1E-W0018-A-03 drive controller use?
A: The HCS01.1E-W0018-A-03-A-CC-EC-NN-L3-NN-FW supports SERCOS III master for cross communication between devices.
Q: What is the peak current capacity for the HCS01.1E-W0018-A-03-A-CC-EC-NN-L3-NN-FW controller?
A: This model can handle a peak device current of 18 A during operation.
Q: How is the HCS01.1E-W0018-A-03 drive controller cooled?
A: Cooling is achieved using internal air flow with an integrated blower.
Q: What safety interface is implemented in the HCS01.1E-W0018-A-03-A-CC-EC-NN-L3-NN-FW?
A: The safety system features STO (Safe Torque Off) for secure operation.
Q: What mains voltage range does the HCS01.1E-W0018-A-03 drive controller support?
A: It is suitable for mains voltages ranging from 3 x AC 200 to 500 V with a tolerance of ±10%.
