HCS01.1E-W0018-A-03-A-CC-EC-ET-S5-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911386717
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
7 Seconds
The Bosch Rexroth Indramat HCS01.1E-W0018-A-03-A-CC-EC-ET-S5-NN-FW is part of the HCS IndraDrive Controllers series. This HCS drive controller supports SERCOS III cross communication and MultiEthernet interfaces, and includes encoder connectivity for IndraDyn Hiperface and EnDat 2.1/2.2. It delivers a peak current of 18 Amps, uses internal air cooling with a built-in blower, and has an IP20 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-03-A-CC-EC-ET-S5-NN-FW is a compact drive controller manufactured by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It forms the power and communication link between AC mains, servo motors, and higher-level motion control systems. By combining power conversion, feedback handling, and fieldbus communication in one housing, the device supports precise speed and torque regulation in conveyor, packaging, and handling stations. Its compact format also helps reduce panel space while keeping the drive, feedback, and network functions in a single unit.
Internally, the controller uses the ADVANCED control section, giving it added processing capability for multi-axis coordination. It connects to the automation network through a SERCOS III master channel that supports cross communication, so real-time setpoints and diagnostic data can move directly between drives. The power stage accepts a three-phase input of 3 × AC 200–500 V ±10%, allowing operation on a wide range of industrial power systems. Under dynamic load, it can deliver a device peak current of 18 A, which supports short-term torque demand during acceleration and similar transient events. Thermal management relies on internal air cooling driven by an integrated blower, so the controller can remove heat without external liquid cooling. The unit uses design version 1.
For feedback and higher-level communication, Interface 1 accepts IndraDyn Hiperface/EnDat 2.2 encoder signals, while Interface 2 offers MultiEthernet connectivity for control systems that use different Ethernet-based protocols. The housing carries an IP20 rating, which means it is touch-safe when mounted inside a closed electrical cabinet but is not sealed against liquids. Power exchange uses a shared DC bus infeed, allowing several drives on the DC bus to use regenerative energy instead of dissipating it as heat. The unit is supplied without additional design extras, which keeps the configuration straightforward for standard machine layouts.
Frequently Asked Questions about HCS01.1E-W0018-A-03-A-CC-EC-ET-S5-NN-FW:
Q: What is the control section design type of the HCS01.1E-W0018-A-03-A-CC-EC-ET-S5-NN-FW controller?
A: The control section design type for this model is ADVANCED.
Q: What is the peak current supported by the HCS01.1E-W0018-A-03-A-CC-EC-ET-S5-NN-FW?
A: This drive controller supports a device peak current of 18 A.
Q: What cooling method is used in the HCS01.1E-W0018-A-03-A-CC-EC-ET-S5-NN-FW drive controller?
A: The HCS01.1E-W0018-A-03-A-CC-EC-ET-S5-NN-FW is cooled using air internally via an integrated blower.
Q: Which communication interface is available on the HCS01.1E-W0018-A-03-A-CC-EC-ET-S5-NN-FW?
A: This controller provides a SERCOS III master communication interface, allowing for cross communication.
Q: What is the supported mains voltage range for the HCS01.1E-W0018-A-03-A-CC-EC-ET-S5-NN-FW drive controller?
A: The HCS01.1E-W0018-A-03-A-CC-EC-ET-S5-NN-FW supports a mains voltage range of 3 x AC 200 to 500 V ±10%.
