HCS01.1E-W0018-A-03-A-CC-EC-EM-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911369638
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0018-A-03-A-CC-EC-EM-NN-NN-FW is a drive controller from the HCS IndraDrive Controllers series with a peak current of 18 Amps. It features an ADVANCED control section design, utilizes SERCOS III master communication, and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2. Internal air cooling is achieved through an integrated blower, and the device is rated IP20.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-03-A-CC-EC-EM-NN-NN-FW is a compact motion-control unit produced by Bosch Rexroth Indramat in the HCS IndraDrive Controllers series. Working as the central regulating element inside multi-axis machinery, it coordinates power flow between the supply network and connected servo drives so that speed, torque, and position commands from the automation system are carried out accurately. The controller serves in conveyors, packaging stations, and pick-and-place cells where coordinated axis behavior and stable closed-loop control are required.
The device accepts a three-phase supply of 3 x AC 200–500 V with a tolerance of ±10%, allowing it to operate on common industrial power systems. During fast acceleration, it can deliver a peak output of 18 A, which sets the upper current level for the connected axis. The housing is rated IP20, so it is finger-safe but must be installed inside a control cabinet. Heat is removed by an internal air blower, which eliminates the need for external ducting. Communication is handled through a SERCOS III master channel that also supports cross-communication between drives. The unit is design version 1, carries the HCS01 line identifier, and does not include a dedicated safety interface.
On the control side, the unit uses an ADVANCED control section for expanded motion functions and diagnostics. Motor feedback is processed through an IndraDyn Hiperface/EnDat 2.1/2.2 interface, while a second port provides encoder emulation signals for external monitoring of shaft position. The power section supports infeeding and fed operation, so returned kinetic energy can be sent back to the DC bus instead of being dissipated in brake resistors. This arrangement helps the controller fit applications that combine coordinated motion, regenerative operation, and mixed feedback requirements within one compact drive platform.
Frequently Asked Questions about HCS01.1E-W0018-A-03-A-CC-EC-EM-NN-NN-FW:
Q: What communication interface does the HCS01.1E-W0018-A-03-A-CC-EC-EM-NN-NN-FW controller utilize?
A: The HCS01.1E-W0018-A-03-A-CC-EC-EM-NN-NN-FW supports SERCOS III master communication with cross communication capabilities.
Q: How is the HCS01.1E-W0018-A-03-A-CC-EC-EM-NN-NN-FW cooled during operation?
A: This drive controller uses an internal air cooling method via an integrated blower.
Q: What is the peak current capability of the HCS01.1E-W0018-A-03-A-CC-EC-EM-NN-NN-FW?
A: The device has a peak current rating of 18 A, which allows it to handle higher load demands for short periods.
Q: Which encoder protocols are compatible with Interface 1 of the HCS01.1E-W0018-A-03-A-CC-EC-EM-NN-NN-FW?
A: The first interface on this controller supports encoders with IndraDyn Hiperface and EnDat 2.1/2.2 protocols.
Q: What is the acceptable mains voltage range for the HCS01.1E-W0018-A-03-A-CC-EC-EM-NN-NN-FW?
A: It operates with a mains voltage range of 3-phase AC 200 to 500 V, allowing for broad installation flexibility.
