Product Description:

The HCS01.1E-W0018-A-03-A-CC-EC-CN-S4-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. Designed for multi-axis automation, it supplies regulated power to servo motors, monitors feedback signals, and links motion commands to the plant control system. This arrangement allows the controller to support closed-loop motion tasks in compact machine cabinets without requiring a separate control device for each axis.

Real-time axis coordination is handled through the SERCOS III master with cross communication interface, which lets several drives exchange position data without extra gateways. The control electronics use the ADVANCED control section, adding processing capacity for complex motion functions. An internal blower provides air cooling, so no external ducting is required. The drive can deliver up to 18 A of peak output current to support short acceleration bursts before returning to nominal load. It accepts a supply of 3 x AC 200 to 500 V ±10%, allowing use on both 230 V and 460 V power systems. With an enclosure rated at IP20, the unit must be mounted in a protected cabinet while still allowing front access for wiring and service. The HCS01 line identifier indicates the basic platform size for this controller.

Position data is accepted through the IndraDyn Hiperface and EnDat 2.1/2.2 encoder interface, allowing use with standard Rexroth motor feedback systems. Higher-level diagnostics and parameter changes travel on CANopen, which operates alongside the motion bus for service communication. Energy handling relies on an infeeding or fed power supply stage, so the controller can return regenerative energy or draw power from a shared DC bus. The unit is Design Version 1. Because the controller is internally cooled, cabinet airflow remains easier to manage and external cooling capacity can be reserved for nearby devices.