HCS01.1E-W0018-A-02-E-S3-EC-EP-L3-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911401311
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
45 Seconds
The Bosch Rexroth Indramat HCS01.1E-W0018-A-02-E-S3-EC-EP-L3-NN-FW is a drive controller from the HCS IndraDrive Controllers series designed with an ECONOMY control section. It features a SERCOS III communication interface, a device peak current of 18 Amps, and air cooling through an integrated blower. This model operates with a mains voltage range of 3 x AC 110 to 230 Volts and provides STO safety interface with IP20 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-02-E-S3-EC-EP-L3-NN-FW is a drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It belongs to the HCS01 line and is supplied in design version 1. In multi-axis automation cells, this controller supplies regulated power to synchronous and asynchronous motors while exchanging real-time status with a higher-level PLC. Its integrated power section and control electronics allow compact installation, making the unit a central element for motion, positioning, and torque regulation tasks on assembly lines, packaging machines, and material-handling equipment. Because the power section and control electronics are combined in one unit, cabinet layouts can stay compact and interconnections between separate modules are reduced. This format suits machines that need coordinated axis control without a large installation footprint.
The power stage accepts three-phase input from 3 x AC 110...230 V ±10% and can deliver a device peak current of 18 A during short acceleration or braking demands. For networked motion control, communication runs over SERCOS III, providing deterministic 100 Mbit/s messaging to synchronize drives within sub-millisecond cycles. The control section uses the ECONOMY variant and provides the core motion functions for this series. Thermal management relies on internal air cooling, and an integrated blower moves cabinet air across the heat sink so no external ducting is required. The first feedback port supports IndraDyn Hiperface/EnDat 2.1/2.2 encoder feedback for absolute position data, permitting closed-loop operation without additional interface cards. This feedback compatibility lets the controller support servo operation with absolute position data available to the drive.
The controller has an enclosure rating of IP20, so it is touch-safe but requires a closed panel in dusty areas. Motion can be disabled through the integrated STO channel, providing basic personnel protection without external relays. The power supply section is classified for infeeding and feeding operation, meaning a shared DC bus can both receive regenerated energy and distribute it to neighboring axes. This arrangement supports energy exchange across adjacent axes during dynamic operation on a shared DC bus.
