Product Description:

The HCS01.1E-W0018-A-02-B-ET-EC-EC-S5-NN-FW is a drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. As an HCS drive controller, it supplies regulated three-phase power and closed-loop command signals to synchronous servomotors and spindle drives used in industrial automation cells, packaging equipment, and material-handling stations. Its role is to translate motion commands from a PLC into precise current, speed, and position control while monitoring operating limits and fieldbus traffic.

This controller links to upper-level networks through a MultiEthernet port, providing real-time communication for diagnostics and parameter transfer. On the power side, it accepts 3 x AC 110…230 V ±10% input and, within that range, the inverter stage can deliver up to 18 A of peak output current for rapid acceleration demands. Thermal loads are managed by internal air cooling, which draws cabinet air across the heat sink with an integrated blower and eliminates the need for external ducts. The housing carries an IP20 ingress rating, so installation must be inside a closed electrical enclosure, but no additional gaskets are required for ordinary indoor environments.

The control platform is the BASIC section, which provides standard motion functions for this unit. For feedback, both X4 and X5 ports read IndraDyn Hiperface/EnDat 2.1/2.2 encoder signals, allowing absolute position capture from modern motor encoders without interface converters. The unit is design version 1, indicating the first mechanical release of the HCS01 line, so mounting points and connector orientation match early series drawings. The power supply unit is rated Infeeding / Feeded, so the device can either act as the main infeed that returns braking energy to the mains or operate as a consumer on a common bus section.