HCS01.1E-W0018-A-02-B-ET-EC-EC-S4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911342166
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0018-A-02-B-ET-EC-EC-S4-NN-FW is part of the HCS IndraDrive Controllers series and is designed as an HCS drive controller with a device peak current of 18 Amps. It features MultiEthernet communication, has internal air cooling through an integrated blower, and operates with a mains voltage of 3 x AC 110 to 230 Volts plus or minus 10 percent. The controller has an IP20 protection rating and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1 or 2.2.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-02-B-ET-EC-EC-S4-NN-FW is a drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It combines a power stage and control electronics to regulate servo and induction motors used in industrial handling, packaging, and machining cells. By converting the incoming three-phase supply into controlled output voltage and current, the unit executes speed, torque, and position commands issued by higher-level PLCs. This arrangement allows one compact controller to manage motor response while supporting repeatable motion in automated equipment.
The control section is classified as BASIC, so parameter sets and diagnostics are handled through a streamlined feature set suited for standard motion tasks. Network data exchange occurs over the integrated MultiEthernet port, allowing the device to join EtherNet/IP, PROFINET, or EtherCAT topologies without extra option cards. Its input accepts a mains window of 3 x AC 110…230 V ±10%, making the controller suitable for low-voltage installations on both 50 Hz and 60 Hz grids. During dynamic acceleration or deceleration, the inverter can deliver a device peak current of 18 A, which is the maximum short-term motor current the drive can supply before protective limiting begins. The housing carries an IP20 rating, so it must be mounted inside a control cabinet where solid objects larger than 12.5 mm are excluded and convection airflow is available.
The unit is Design Version 1, indicating the first mechanical and electrical release of this power section. Heat is removed by an internal blower, eliminating the need for external ducting and keeping sensitive components below their thermal limits at full load. Two feedback sockets support Encoder IndraDyn Hiperface/EnDat 2.1/2.2 protocols, enabling absolute position reporting from synchronous motors without additional converters. Power sharing can be arranged because the unit is configured for Infeeding/Feeded operation, meaning it may operate as a common DC bus supply or as a follower that draws energy from another infeed module.
Frequently Asked Questions about HCS01.1E-W0018-A-02-B-ET-EC-EC-S4-NN-FW:
Q: What communication interface is available on the HCS01.1E-W0018-A-02-B-ET-EC-EC-S4-NN-FW?
A: This controller provides MultiEthernet communication for networking and system integration.
Q: What is the peak current rating of the HCS01.1E-W0018-A-02-B-ET-EC-EC-S4-NN-FW?
A: The HCS01.1E-W0018-A-02-B-ET-EC-EC-S4-NN-FW supports a device peak current of 18 A.
Q: How is the HCS01.1E-W0018-A-02-B-ET-EC-EC-S4-NN-FW cooled during operation?
A: This drive controller uses an internal air cooling method with an integrated blower.
Q: What is the IP rating of the HCS01.1E-W0018-A-02-B-ET-EC-EC-S4-NN-FW drive controller?
A: The controller features an IP20 protection rating, suitable for environments without direct exposure to dust and moisture.
Q: What mains voltage range does the HCS01.1E-W0018-A-02-B-ET-EC-EC-S4-NN-FW support?
A: It can operate on a three-phase mains voltage from 110 to 230 V AC ±10%.
