HCS01.1E-W0018-A-02-B-ET-EC-EC-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911332181
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0018-A-02-B-ET-EC-EC-NN-NN-FW is part of the HCS IndraDrive Controllers series. This HCS drive controller features a MultiEthernet communication interface and internal air cooling through an integrated blower. It has a device peak current of 18 Amps and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-02-B-ET-EC-EC-NN-NN-FW is a drive controller built by Bosch Rexroth Indramat and included in the HCS IndraDrive Controllers series. Its platform follows the HCS01 line, so it shares mounting dimensions with companion modules. It regulates servo and induction motors in multi-axis automation cells by converting line power into controlled output and by exchanging motion data with higher-level PLCs. The unit offers scalable performance for packaging, material handling, and general machinery where compact, panel-mounted control hardware is required.
The controller accepts a three-phase mains supply of 3 x AC 110 to 230 V ±10%, so it can wire directly to plant power without an external transformer. An internal IGBT stage delivers a peak current of 18 A for brief acceleration demands. Motion and diagnostic data travel over the MultiEthernet interface, which can be set to EtherNet/IP, PROFINET, or EtherCAT. The control section is the BASIC variant, providing standard axis functions and omitting optional add-ons. An IP20 housing requires cabinet mounting while guarding against contact with live parts. The supply section is set for common DC-bus use, allowing multiple drives to share energy.
Both feedback sockets are wired for IndraDyn Hiperface/EnDat 2.1/2.2 encoders, allowing absolute position data to be read without additional adapter boards. Cooling uses internal air cooling through an integrated blower, so cabinet airflow requirements stay minimal while the drive removes its own heat. Design Version 1 identifies the first release of this unit. The integrated power module supports infeeding and fed operation, allowing the unit to act as a DC-bus supply or as a consumer on a shared bus. No safety interface is included, and the control section is factory matched so no additional options are specified.
Frequently Asked Questions about HCS01.1E-W0018-A-02-B-ET-EC-EC-NN-NN-FW:
Q: What type of communication interface does the HCS01.1E-W0018-A-02-B-ET-EC-EC-NN-NN-FW drive controller use?
A: The HCS01.1E-W0018-A-02-B-ET-EC-EC-NN-NN-FW supports MultiEthernet communication for flexible network integration.
Q: What is the mains voltage requirement for the HCS01.1E-W0018-A-02-B-ET-EC-EC-NN-NN-FW?
A: This drive controller operates with a mains voltage of 3 x AC 110 to 230 V ±10%, making it suitable for a range of global power standards.
Q: What is the peak current supported by the HCS01.1E-W0018-A-02-B-ET-EC-EC-NN-NN-FW drive controller?
A: The HCS01.1E-W0018-A-02-B-ET-EC-EC-NN-NN-FW has a device peak current rating of 18 A for high-demand operations.
Q: How is the HCS01.1E-W0018-A-02-B-ET-EC-EC-NN-NN-FW cooled?
A: Cooling is handled by internal air circulation through an integrated blower in this model.
Q: What is the IP rating of the HCS01.1E-W0018-A-02-B-ET-EC-EC-NN-NN-FW drive controller?
A: This controller features IP20 protection, offering basic dust ingress protection for indoor environments.
