HCS01.1E-W0018-A-02-B-ET-EC-DA-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911345397
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0018-A-02-B-ET-EC-DA-NN-NN-FW is part of the HCS IndraDrive Controllers series. This HCS Drive Controller features a MultiEthernet communication interface and an IP20 rating, with a device peak current of 18 Amps. It uses an internal air cooling method through an integrated blower and operates at 3 x AC 110 to 230 Volts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-02-B-ET-EC-DA-NN-NN-FW drive controller is built by Bosch Rexroth Indramat as part of the HCS IndraDrive Controllers series. It forms the power and control core for a single automation axis, converting rectified mains energy into regulated three-phase output and executing motion commands supplied by a PLC or higher-level control system. By coordinating torque and position feedback from attached motors, the unit supports accurate positioning, velocity regulation, and synchronized multi-axis tasks on factory floors.
The controller interfaces with higher-level networks through a MultiEthernet port, enabling PROFINET, EtherNet/IP, or EtherCAT selection via software. Thermal management relies on internal air cooling from an integrated blower, eliminating cabinet ducting. Supplied from 3 x AC 110–230 V ±10% three-phase mains, the power stage can deliver up to 18 A of peak current to synchronous or asynchronous motors during acceleration. An enclosure classification of IP20 permits installation in electrically safe switchgear assemblies where moisture protection is handled by the cabinet. Because the unit is not equipped with a safety interface, external emergency-stop relays must be wired for category-rated shutdown.
Control logic is provided by the paired BASIC section, which plugs directly onto the power module and shares DC-bus diagnostics across the HCS01 line. Precise rotor data enters through the dedicated Encoder IndraDyn Hiperface/EnDat 2.1/2.2 channel, allowing high-resolution feedback without extra interface cards. The energy interface is specified as infeeding and fed operation, so the device can either supply regenerated power to neighboring axes or accept power from a common supply module in multi-axis arrangements. Hardware release version 1 identifies the mechanical layout and connector set.
Frequently Asked Questions about HCS01.1E-W0018-A-02-B-ET-EC-DA-NN-NN-FW:
Q: What communication interface does the HCS01.1E-W0018-A-02-B-ET-EC-DA-NN-NN-FW use?
A: The HCS01.1E-W0018-A-02-B-ET-EC-DA-NN-NN-FW features MultiEthernet communication, supporting various industrial Ethernet protocols.
Q: What is the device peak current of the HCS01.1E-W0018-A-02-B-ET-EC-DA-NN-NN-FW?
A: This model provides a device peak current of 18 A, accommodating applications that require high current handling.
Q: How is the HCS01.1E-W0018-A-02-B-ET-EC-DA-NN-NN-FW cooled?
A: The cooling is managed by an internal air system using an integrated blower for efficient temperature control.
Q: What is the mains voltage requirement for the HCS01.1E-W0018-A-02-B-ET-EC-DA-NN-NN-FW?
A: This drive controller operates with a mains voltage of 3 x AC 110 to 230 V ±10%.
Q: What is the IP rating of the HCS01.1E-W0018-A-02-B-ET-EC-DA-NN-NN-FW controller?
A: The unit has an IP20 rating, providing protection from solid objects greater than 12 mm but no protection against liquid ingress.
