HCS01.1E-W0018-A-02-A-ET-EC-NN-L3-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911396367
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0018-A-02-A-ET-EC-NN-L3-NN-FW is part of the HCS IndraDrive Controllers series and operates with a device peak current of 18 A and an IP20 rating. It features MultiEthernet communication, an encoder interface for IndraDyn Hiperface or EnDat 2.1/2.2, and uses an internal air cooling method with an integrated blower. The drive controller supports mains voltage of 3 x AC 110 to 230 V and includes an STO safety interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-02-A-ET-EC-NN-L3-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It converts incoming mains power into regulated motor current so that machine axes can follow commanded speed, torque, or position references. Installed in a control cabinet, the controller works with an external control section to operate conveyors, pick-and-place units, and other material-handling equipment. Within an IndraDrive system, it serves as the power section while the control section handles command processing and network management. This arrangement supports compact cabinet layouts for general industrial motion applications.
The unit accepts a three-phase supply of 3 x AC 110...230 V ±10% and can deliver up to 18 A of peak current to the connected motor. Heat is removed by a built-in air blower, so cabinet airflow must support the cooling path without requiring an external fan. The enclosure has an IP20 rating, which protects against accidental finger contact but still requires installation inside a suitable cabinet. Because IP20 does not seal against dust or moisture, the surrounding enclosure must provide the needed protection for the application. The power stage can share a common DC bus and return braking energy to the mains during deceleration. Communication with the higher-level control runs over MultiEthernet, allowing integration with industrial Ethernet networks such as PROFINET or EtherNet/IP.
Motor feedback is connected through Interface 1, which accepts Encoder IndraDyn Hiperface/EnDat 2.1/2.2 signals for closed-loop control. This feedback compatibility supports servo motors that use those digital encoder families for position and speed data. Interface 2 is not equipped, so this version uses a single feedback input. Functional safety is provided by STO (Safe Torque Off), which disables torque production without removing mains power from the unit. The controller belongs to the HCS01 line and is intended for use with a BASIC control section.
Frequently Asked Questions about HCS01.1E-W0018-A-02-A-ET-EC-NN-L3-NN-FW:
Q: What type of communication interface does the HCS01.1E-W0018-A-02-A-ET-EC-NN-L3-NN-FW drive controller use?
A: This model features a MultiEthernet communication interface for flexible network connectivity.
Q: What is the peak current supported by the HCS01.1E-W0018-A-02-A-ET-EC-NN-L3-NN-FW controller?
A: It supports a device peak current of 18 A for high-performance drive applications.
Q: How is the HCS01.1E-W0018-A-02-A-ET-EC-NN-L3-NN-FW drive controller cooled?
A: The internal air cooling system uses an integrated blower to maintain operating temperature.
Q: What mains voltage range does the HCS01.1E-W0018-A-02-A-ET-EC-NN-L3-NN-FW support?
A: This unit operates with a mains supply voltage of 3 x AC 110 to 230 V ±10%.
Q: What safety interface is present on the HCS01.1E-W0018-A-02-A-ET-EC-NN-L3-NN-FW model?
A: It features an STO (Safe Torque Off) safety interface for enhanced operational safety.
