HCS01.1E-W0018-A-02-A-CC-EC-ET-L3-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911345876
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0018-A-02-A-CC-EC-ET-L3-NN-FW is part of the HCS IndraDrive Controllers series. This HCS drive controller features SERCOS III master communication and MultiEthernet interfaces and supports encoder interfaces such as IndraDyn Hiperface or EnDat 2.1/2.2. It has a device peak current of 18 Amps, uses an internal blower for air cooling, and is rated at IP20.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-02-A-CC-EC-ET-L3-NN-FW is a drive controller in the Bosch Rexroth Indramat HCS IndraDrive Controllers series. It regulates power flow between low-voltage mains and compatible IndraDyn servo motors for compact automation equipment. By combining power conversion, feedback processing, and network connectivity in one housing, the unit supports coordinated motion on pick-and-place axes, packaging machines, and similar systems. This arrangement helps reduce panel space compared with layouts that separate the power stage and communication interfaces. The integrated power supply module also supports infeeding operation within the controller.
Electrical integration starts with a three-phase supply range of 3 x AC 110–230 V ±10%, allowing the controller to operate from common low-voltage transformer-fed sources. An internal blower moves air through the heat sink so the drive can sustain a device peak current of 18 A without external ducting. The enclosure is rated IP20, so the controller is intended for installation inside a switch cabinet. Motion commands and diagnostic data are exchanged over SERCOS III, which supports synchronized communication between connected axes. The control section is classified as ADVANCED, giving access to encoder evaluation, axis supervision, and drive-based logic functions. The cooling path depends on open cabinet airflow around the housing.
A second communication path is provided by a MultiEthernet port, which can present EtherNet/IP, PROFINET, or EtherCAT to the higher-level PLC. Motor feedback is connected through the combined Hiperface and EnDat 2.2 encoder interface, so no separate feedback card is required. Functional safety is handled by STO (Safe Torque Off), which removes torque-producing energy during an emergency stop without switching the mains contactor. The unit is in Design Version 1. This combination allows the controller to exchange motion data with the control system while receiving motor position information through the integrated feedback connection.
Frequently Asked Questions about HCS01.1E-W0018-A-02-A-CC-EC-ET-L3-NN-FW:
Q: What is the peak current rating of the HCS01.1E-W0018-A-02-A-CC-EC-ET-L3-NN-FW drive controller?
A: This device offers a peak current of 18 A for high-demand motion control applications.
Q: What communication interface does the HCS01.1E-W0018-A-02-A-CC-EC-ET-L3-NN-FW provide?
A: The controller supports SERCOS III master functionality for cross communication between multiple drives.
Q: How is the HCS01.1E-W0018-A-02-A-CC-EC-ET-L3-NN-FW drive controller cooled?
A: The cooling is managed internally by an integrated blower that circulates air within the unit.
Q: What type of safety interface is equipped on the HCS01.1E-W0018-A-02-A-CC-EC-ET-L3-NN-FW controller?
A: The main safety function is the STO (Safe Torque Off) interface for emergency torque disconnection.
Q: What mains voltage range does the HCS01.1E-W0018-A-02-A-CC-EC-ET-L3-NN-FW support?
A: This model operates on a mains voltage of 3 x AC 110 to 230 V with a ±10% tolerance.
