HCS01.1E-W0018-A-02-A-CC-EC-EM-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911346462
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0018-A-02-A-CC-EC-EM-NN-NN-FW is part of the HCS IndraDrive Controllers series and is rated for a mains voltage of 3 x AC 110 to 230 V with a ±10% tolerance. This ADVANCED design drive controller features an integrated blower cooling method and a device peak current of 18 Amps with a maximum output frequency of 1600 Hz. It offers SERCOS III master communication and supports encoder interfaces like IndraDyn Hiperface and EnDat 2.1/2.2.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-02-A-CC-EC-EM-NN-NN-FW is an HCS drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. As part of the HCS01 line and design version 1, it is used in multi-axis machines to regulate motor power within the unit's operating limits. By converting utility power into controlled three-phase output, the controller supports motion profiles, velocity loops, and torque limits in packaging, handling, and processing equipment that require accurate drive regulation. It is suited to coordinated axes where the drive must respond quickly to command changes and load variation during repeated production cycles.
Its power stage accepts 3 x AC 110 to 230 V ±10% and can deliver a continuous current of 7.6 A to the connected motor, while short-duty demand is supported up to 18 A. With a carrier frequency of 1600 Hz, the controller supports smooth speed control, and the housing has an IP20 rating for cabinet installation. Output voltage is limited to 230 V three-phase, which matches low-voltage servomotors without exceeding the controller's range. Compliance with IEC 61800-3 keeps conducted and radiated emissions within industrial limits. The unit can operate in infeeding or fed power-supply configurations, and it remains thermally stable at an ambient temperature of 40 °C under continuous duty.
Control logic is powered from 24 V (±20%), and the ADVANCED control section manages axis loops and diagnostics without a safety interface. Real-time command exchange travels over SERCOS III master cross communication, while feedback ports support IndraDyn Hiperface or EnDat 2.1/2.2 encoders and provide separate encoder emulation for legacy drives. Cooling is handled by an integrated blower that uses internal air cooling through the heat sink, limiting continuous power dissipation to 70 W. The encoder interfaces allow the drive to process position and speed data directly for closed-loop operation, and the separate emulation output supports connection to compatible older systems.
Frequently Asked Questions about HCS01.1E-W0018-A-02-A-CC-EC-EM-NN-NN-FW:
Q: What is the mains voltage range supported by the HCS01.1E-W0018-A-02-A-CC-EC-EM-NN-NN-FW controller?
A: The HCS01.1E-W0018-A-02-A-CC-EC-EM-NN-NN-FW controller operates with a mains voltage range of 3 x AC 110 to 230 V, with a tolerance of ±10%.
Q: What is the maximum output current of the HCS01.1E-W0018-A-02-A-CC-EC-EM-NN-NN-FW?
A: This model can deliver a maximum output current of 7.6 amps.
Q: How is the HCS01.1E-W0018-A-02-A-CC-EC-EM-NN-NN-FW cooled?
A: An internal integrated blower provides air cooling for this drive controller.
Q: What is the IP rating for the HCS01.1E-W0018-A-02-A-CC-EC-EM-NN-NN-FW controller?
A: The unit is built to an IP20 rating and is suitable for installation in protected environments only.
Q: Which communication interface is available on the HCS01.1E-W0018-A-02-A-CC-EC-EM-NN-NN-FW?
A: This controller uses a SERCOS III master communication interface with cross communication capabilities.
