HCS01.1E-W0018-A-02-A-CC-EC-EC-L4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911403233
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0018-A-02-A-CC-EC-EC-L4-NN-FW is part of the HCS IndraDrive Controllers series. This drive controller is equipped with SERCOS III cross communication, an ADVANCED control section design, and an IP20 rating. It features a device peak current of 18 Amps, operates with a mains voltage of 3 x AC 110 to 230 Volts, and uses internal air cooling through an integrated blower.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-02-A-CC-EC-EC-L4-NN-FW is a drive controller produced by Bosch Rexroth Indramat and delivered within the HCS IndraDrive Controllers series. As a compact cabinet-mounted unit, it coordinates servo axes in automated machinery by converting mains power into regulated current for IndraDyn motors. It also exchanges motion commands with higher-level PLCs so the drive can participate in synchronized machine control. This makes the unit suitable for installations where coordinated axis movement and compact cabinet layout are both important.
The controller communicates with neighboring drives via the SERCOS III master interface, so synchronized cross-communication can be built into ring or line network topologies. That layout supports coordinated data exchange between axes without requiring separate point-to-point links for each adjacent module. It accepts a supply of 3 x AC 110...230 V ±10% and, during short dynamic events, can deliver up to 18 A of peak device current to the motor windings. Internal thermal management uses internal air cooling with an integrated blower, which directs airflow across heat-generating components without external ducting. The housing carries an IP20 rating, making it suitable for installation in closed control cabinets where protection from direct contact is sufficient. It has no optional mechanical add-ons, so the footprint stays unchanged across similar power classes.
The control section is identified as ADVANCED, so additional processing resources are available for drive-based logic, fast position loops, and diagnostic functions. Power enters through a common bus infeed, allowing DC bus sharing within a multi-axis rack. Integrated safety circuitry provides STO (Safe Torque Off) and SBC (Safe Brake Control), so motion can be safely inhibited or a holding brake can be commanded without external relays. Two identical feedback channels accept IndraDyn Hiperface or EnDat 2.1/2.2 encoder signals, which supports redundant or multi-motor feedback arrangements and gives the controller flexibility with different motor feedback formats.
Frequently Asked Questions about HCS01.1E-W0018-A-02-A-CC-EC-EC-L4-NN-FW:
Q: What type of communication interface does the HCS01.1E-W0018-A-02-A-CC-EC-EC-L4-NN-FW controller provide?
A: This controller is equipped with a SERCOS III master interface featuring cross communication capabilities.
Q: What encoder interfaces are available on the HCS01.1E-W0018-A-02-A-CC-EC-EC-L4-NN-FW?
A: The device supports encoder connections through IndraDyn Hiperface and EnDat 2.1/2.2 interfaces on both Interface 1 and 2.
Q: How is the HCS01.1E-W0018-A-02-A-CC-EC-EC-L4-NN-FW controller cooled?
A: Air cooling is achieved through an internal integrated blower on this model.
Q: What is the peak current capability of the HCS01.1E-W0018-A-02-A-CC-EC-EC-L4-NN-FW?
A: The maximum peak device current is 18 A for this drive controller.
Q: What safety features are present on the HCS01.1E-W0018-A-02-A-CC-EC-EC-L4-NN-FW controller?
A: The safety interface includes STO (Safe Torque Off) and SBC (Safe Brake Control) features.
