HCS01.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911372301
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
33 Seconds
The Bosch Rexroth Indramat HCS01.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW is part of the HCS IndraDrive Controllers series and has a device peak current of 18 Amps. This drive controller uses air cooling with an internal blower and supports SERCOS III master cross communication and CANopen interfaces. It operates at a mains voltage of 3 x AC 110 to 230 Volts with an IP20 rating and features encoder interfaces like IndraDyn Hiperface and EnDat 2.1/2.2.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-02-A-CC-EC-CN-NN-NN-FW is a compact power section produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. Mounted inside a control cabinet, the module converts line power into a regulated DC bus and a three-phase output that energizes synchronous or asynchronous motors with stable voltage and current control. This link between the motion logic in the attached control section and the machine’s actuators makes it suitable for single-axis handling stations, packaging equipment, and light assembly cells that demand precise velocity or torque regulation during repeated cycle changes. Because the power stage and control section are separate, the module fits cabinet layouts that keep motion electronics compact and organized.
The unit can supply up to 18 A of peak phase current, giving short bursts of acceleration during indexing or speed changes. It accepts a supply of 3-phase 110–230 V AC ±10%, allowing connection to common factory services used with compact industrial drives. Drive commands and status data travel on a SERCOS III master interface that supports cross-communication between neighboring drives, which helps reduce extra field cabling in multi-axis cabinets. Heat is removed by internal air cooling through an integrated blower, so unobstructed cabinet airflow is required around the housing. The enclosure carries an IP20 rating, which provides touch protection for installed components but still requires cabinet mounting away from dust and moisture.
This power module mates with the control section designated ADVANCED, enabling expanded PLC functions and electronic gearing for coordinated axis behavior. Position feedback arrives through a single port that supports IndraDyn Hiperface/EnDat 2.2 encoders, while peripheral I/O can be linked over CANopen for connection to compatible devices. The unit uses the Infeeding/Feeded category for energy exchange with a shared DC bus, allowing regenerative braking power to return to upstream supplies instead of being dissipated locally. It is design version 1 and comes without additional design features, which keeps the hardware configuration straightforward.
