HCS01.1E-W0018-A-02 Bosch Rexroth Indramat
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0018-A-02 is part of the HCS IndraDrive Controllers series and is designed as an HCS drive controller. It supports a device peak current of 18 A with air cooling through an integrated blower. The controller is rated for a mains voltage of 3 x AC 110 to 230 V and has IP20 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-02 is a drive controller built by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. As a servo inverter, it converts incoming mains power into a controlled three-phase output that governs torque, speed, and position of attached motors while exchanging status data with higher-level PLCs. In automated packaging cells, conveyor modules, or small handling systems, this controller supplies regulated energy to the axis and manages braking recovery without separate contactors. It is suited to compact motion tasks where the same unit must support acceleration, steady running, and controlled deceleration.
The controller draws a three-phase supply from 3 x AC 110–230 V ±10%, so it can be used with common low-voltage industrial distribution systems. Its power stage delivers up to 18 A of peak output current, providing margin for rapid motor acceleration or short regenerative events before thermal limits are reached. Heat is removed by internal air cooling through an integrated blower at the top of the housing, eliminating the need for external ductwork. The enclosure carries an IP20 rating, so the unit is intended for installation inside a control cabinet. That enclosure rating also provides basic finger protection for live parts when the controller is mounted correctly. The unit matches compact drive and feedback interfaces used in pick-and-place axes, indexers, and small conveyor zones.
Within the HCS01 line series, the W0018 hardware uses an infeeding and line-fed topology, allowing bidirectional energy flow between the DC bus and the mains when several controllers share a common supply. The assembly is identified as design version 1, which keeps connector geometry and diagnostic message numbering consistent across early releases. Membership in the HCS IndraDrive Controllers platform keeps parameter sets, safety functions, and engineering tools uniform across larger power classes. This helps maintain the same operating approach when a machine uses more than one controller size.
Frequently Asked Questions about HCS01.1E-W0018-A-02:
Q: What cooling method is used in the HCS01.1E-W0018-A-02 drive controller?
A: The HCS01.1E-W0018-A-02 features internal air cooling through an integrated blower for temperature regulation.
Q: What is the device peak current for the HCS01.1E-W0018-A-02?
A: This model is rated for a device peak current of 18 A.
Q: What mains voltage range is compatible with the HCS01.1E-W0018-A-02 drive controller?
A: The HCS01.1E-W0018-A-02 supports mains voltages of 3 x AC 110 to 230 V with a 10% tolerance.
Q: What is the IP rating of the HCS01.1E-W0018-A-02?
A: This drive controller is built to IP20 protection standards.
Q: Which line series does the HCS01.1E-W0018-A-02 model belong to?
A: The HCS01.1E-W0018-A-02 belongs to the HCS01 line series of IndraDrive controllers.