HCS01.1E-W0013-A-02-E-S3-EC-NN-NN-AA-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911331048
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0013-A-02-E-S3-EC-NN-NN-AA-FW is an HCS Drive Controller in the HCS IndraDrive Controllers series. It features a SERCOS III communication interface, supports a peak current of 13 Amps, and uses air cooling through an integrated blower. The controller operates with a mains voltage of 3 x AC 110 to 230 Volts and has an IP20 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0013-A-02-E-S3-EC-NN-NN-AA-FW drive controller is produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It converts line power into regulated three-phase outputs and executes motion commands for servo axes in packaging, printing, and material-handling equipment. Acting as the interface between an IndraDyn motor and the plant PLC, it provides closed-loop velocity and position control over a deterministic network. This arrangement lets the drive respond quickly to command changes while maintaining stable motor operation under changing load conditions.
The controller communicates over SERCOS III, so setpoints and diagnostics share the same ring used by other IndraDrive devices. It accepts 3 × AC 110…230 V ±10% mains power, enabling operation from single-phase or three-phase services without an autotransformer. An integrated blower drives air across the heat sink and into the cabinet, so the surrounding panel must provide a clear airflow path. A peak output of 13 A supports brief acceleration bursts before current limiting intervenes, and the IP20 enclosure means the unit must be installed inside a control panel. Motion commands are handled by the ECONOMY control section, which omits advanced safety functions but maintains full drive performance for standard tasks, and the power section is factory paired with this control section.
Feedback is handled through the Encoder IndraDyn Hiperface/EnDat 2.1/2.2 port on the front panel. A second feedback channel is not equipped, which simplifies wiring at the drive and keeps the front-panel layout straightforward. The hardware corresponds to Design Version 1, and the power module can operate in infeeding or fed mode when linked to adjacent drives on the DC bus. The unit belongs to the HCS01 line, which shares a common mechanical footprint, and the dedicated safety interface is not equipped, so external safety functions must be provided by the machine.
Frequently Asked Questions about HCS01.1E-W0013-A-02-E-S3-EC-NN-NN-AA-FW:
Q: What communication interface does the HCS01.1E-W0013-A-02-E-S3-EC-NN-NN-AA-FW controller use?
A: The HCS01.1E-W0013-A-02-E-S3-EC-NN-NN-AA-FW drive controller utilizes SERCOS III for communication interface.
Q: What is the peak current rating for the HCS01.1E-W0013-A-02-E-S3-EC-NN-NN-AA-FW?
A: This drive controller supports a peak device current of 13 A.
Q: How is the HCS01.1E-W0013-A-02-E-S3-EC-NN-NN-AA-FW cooled during operation?
A: The HCS01.1E-W0013-A-02-E-S3-EC-NN-NN-AA-FW is cooled internally with an integrated blower.
Q: What input mains voltage does the HCS01.1E-W0013-A-02-E-S3-EC-NN-NN-AA-FW controller require?
A: The mains voltage for this model is 3 x AC 110...230 V ±10%.
Q: What IP rating does the HCS01.1E-W0013-A-02-E-S3-EC-NN-NN-AA-FW drive controller have?
A: This controller has an IP20 rating, making it suited for installation in clean environments with no protection against liquids.
