Product Description:

Bosch Rexroth Indramat introduces the HCS01.1E-W0013-A-02-E-S3-EC-NN-L4-AA-FW, a compact drive controller in the HCS IndraDrive Controllers series. Designed for cabinet installation, the unit regulates power flow between low-voltage mains and synchronous or induction motors, enabling coordinated speed and torque control in multi-axis automation lines. By integrating the power stage and control electronics in a single housing, the controller simplifies panel wiring while maintaining the deterministic motion needed for packaging equipment, material handling systems, and light machining stations.

Operating limits center on its device peak current of 13 A, allowing brief overload demands without shutdown. The power stage accepts a three-phase supply of 3 × AC 110–230 V ±10%, so the same hardware can be used on common low-voltage networks. Real-time coordination with the machine PLC is handled through SERCOS III, which transports cyclic setpoints and feedback with deterministic timing. Thermal management relies on internal blower cooling, so the integrated fan circulates panel air across the heat sink without external ducting. Functional safety is built in through STO/SBC channels, which remove torque and command brake closure during guard door openings or emergency stops.

The unit uses the ECONOMY control section, which omits complex option slots and keeps the controller focused on essential axis functions. Motion feedback enters through a multi-protocol encoder port that supports Hiperface/EnDat 2.1/2.2, while a second interface bay is left empty when no additional feedback type is required. The drive is supplied as version 1. Protection against accidental contact is rated at IP20, so the unit must be mounted inside a closed control cabinet and supplied by an appropriate power module.