HCS01.1E-W0013-A-02-E-S3-EC-EP-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911371826
Ask for AvailabilityThe Bosch Rexroth Indramat HCS01.1E-W0013-A-02-E-S3-EC-EP-NN-NN-FW is an HCS Drive Controller from the HCS IndraDrive Controllers series. It supports a SERCOS III communication interface and an encoder interface for IndraDyn Hiperface or EnDat 2.1/2.2. This unit has a device peak current of 13 Amps, uses internal air cooling via an integrated blower, and comes with an IP20 rating.
Internal Product Review
The HCS01.1E-W0013-A-02-E-S3-EC-EP-NN-NN-FW is an HCS drive controller with SERCOS III communication and an ECONOMY control section. Internal air cooling through an integrated blower and IP20 protection support dependable cabinet operation in standard industrial environments. A 13 A peak current is a strong advantage for efficient motion control.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0013-A-02-E-S3-EC-EP-NN-NN-FW is an AC drive controller module built by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It forms the power section of a servo axis in small and medium automation systems, providing regulated DC-link energy and motor output for precise motion tasks. When mounted inside a cabinet, the unit works with a dedicated control section to close current, velocity, and position loops over a real-time network, making it suitable for coordinated multi-axis machine layouts in automated equipment.
On the power side, the HCS01 hardware accepts a three-phase supply of 3 × AC 110…230 V ±10%, which is rectified and buffered for inverter operation before power is delivered to the motor section. Internal thermal design uses internal air cooling with an integrated blower, so cabinet airflow can remain independent of the controller. During dynamic peaks, the unit can deliver up to 13 A of output, providing headroom for short acceleration bursts. Communications and synchronization are handled through the SERCOS III backplane interface, allowing sub-millisecond cycle times between the axis and the control PLC. The housing has an IP20 protection rating, indicating finger-safe terminals and the need for installation inside an enclosure. The HCS01 line designation identifies this model as the smallest frame in the family, and it can operate either as an infeed or as a driven axis depending on system wiring.
This device is supplied as Design 1 hardware and is paired with the control section variant marked ECONOMY, which supports standard motion requirements. Feedback signals reach the controller through a multifunction encoder port that accepts IndraDyn Hiperface and EnDat 2.1 / 2.2 encoders, so both absolute and incremental transducers can be connected without adapters. This arrangement supports mixed feedback device selection across compact servo systems. The power section is rated for infeeding and fed operation, which means it can receive regenerated energy from other axes or supply energy to them, depending on the system layout. No dedicated safety interface is included, and no additional design features are specified.
