Product Description:

The HCS01.1E-W0013-A-02-B-ET-EC-PB-NN-AA-FW is a drive controller manufactured by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It converts mains power into regulated three-phase output for synchronous or induction servomotors and exchanges real-time data with higher-level automation equipment. The unit belongs to the compact HCS01 line and is intended for panel mounting inside control cabinets, where it coordinates motion axes in packaging machinery, handling modules, and other factory automation stations. This arrangement lets the controller serve as a compact power and communication node for a cabinet-mounted axis.

With its MultiEthernet port, the controller can join Profinet, EtherNet/IP, or EtherCAT networks without additional hardware. The power stage supplies up to 13 A of peak current, which suits small-to-medium mechanical loads and short acceleration demands. An IP20 enclosure allows touch-safe installation when the controller is mounted inside a suitable cabinet. The unit accepts a broad input of 3 × AC 110…230 V ±10%, which supports operation from a wide range of cabinet power systems. For motor feedback, it integrates the Encoder IndraDyn Hiperface/EnDat 2.1/2.2 interface, and machine-level communication is available through the onboard PROFIBUS channel.

The unit uses design version 1 and a control section coded as BASIC, which keeps the feature set straightforward. Cooling is provided by internal air cooling driven by an integrated blower, so no external fan tray is required. The power module supports infeeding or fed operation, which allows it to either supply energy to a common DC bus or receive it when operating as a single axis. Because no integrated safety interface is equipped, regulated stop and emergency stop functions must be handled by external safety components or by a drive variant with built-in safety.