HCS01.1E-W0013-A-02-B-ET-EC-NN-NN-AA-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911331046
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
42 Seconds
The Bosch Rexroth Indramat HCS01.1E-W0013-A-02-B-ET-EC-NN-NN-AA-FW is part of the HCS IndraDrive Controllers series and is designed as a BASIC control section type. This drive controller offers a peak device current of 13 Amps, utilizes internal air cooling through an integrated blower, and is rated IP20. It features a MultiEthernet communication interface and supports encoder connections for IndraDyn Hiperface or EnDat 2.1/2.2, operating with a mains voltage range of 3 x AC 110 to 230 Volts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat supplies the HCS01.1E-W0013-A-02-B-ET-EC-NN-NN-AA-FW as part of the HCS IndraDrive Controllers series. This unit is an axis drive controller that regulates torque and speed for synchronous or induction motors in automated machinery. By converting three-phase mains power into controlled output pulses, it forms the link between a plant-level PLC and the connected motor while handling both power amplification and real-time feedback processing.
The control section installed in this hardware is the BASIC variant, and parameter exchange with higher-level networks occurs over the MultiEthernet port, allowing EtherNet/IP, PROFINET, or EtherCAT selection through software. Incoming supply is rated at 3 × AC 110…230 V ±10%, and an internal DC link supports a peak output current of 13 A for short acceleration bursts. Heat generated by the IGBTs is removed by internal air cooling with an integrated blower, so separate cooling hardware is not required for the drive itself. The housing carries an IP20 rating, which permits installation inside a protected electrical enclosure. Rotor position information reaches the drive through the motor feedback connection, while a separate unpopulated slot reserves space for future safety hardware.
The electronic core corresponds to Design Version 1 of the HCS01 line, and power is exchanged with the shared DC bus through the infeeding/feed supply topology, which allows regenerated energy to return to upstream units. Motor feedback wiring is accepted on the dedicated socket that supports IndraDyn Hiperface or EnDat 2.1 / 2.2 encoder feedback, eliminating the need for adapter boards. Firmware is supplied separately so the drive can be loaded with the motion package required by the application. The device ships without a safety interface, and the second communication port is not equipped. Only the matching control plate is compatible with this unit, which maintains proper electrical backplane alignment across the HCS01 family.
Frequently Asked Questions about HCS01.1E-W0013-A-02-B-ET-EC-NN-NN-AA-FW:
Q: What type of communication interface is provided on the HCS01.1E-W0013-A-02-B-ET-EC-NN-NN-AA-FW controller?
A: This drive controller features MultiEthernet communication for flexible connectivity in automation environments.
Q: How is the HCS01.1E-W0013-A-02-B-ET-EC-NN-NN-AA-FW controller cooled?
A: An integrated blower provides internal air cooling in this drive for temperature control.
Q: What is the device peak current for the HCS01.1E-W0013-A-02-B-ET-EC-NN-NN-AA-FW drive controller?
A: The HCS01.1E-W0013-A-02-B-ET-EC-NN-NN-AA-FW operates with a peak current rating of 13 A.
Q: What types of encoder interfaces are available on the HCS01.1E-W0013-A-02-B-ET-EC-NN-NN-AA-FW?
A: This model supports encoder feedback using IndraDyn Hiperface and EnDat 2.1/2.2 on its primary interface.
Q: What is the required mains voltage for the HCS01.1E-W0013-A-02-B-ET-EC-NN-NN-AA-FW drive controller?
A: The HCS01.1E-W0013-A-02-B-ET-EC-NN-NN-AA-FW requires a three-phase AC mains voltage of 110 to 230 V ±10%.
