Product Description:

The HCS01.1E-W0013-A-02-B-ET-EC-NN-L3-NN-NW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It is installed in automation cells to modulate motor torque and speed, forming the link between a machine PLC and the power section that energizes a servomotor or induction motor axis. By coordinating feedback, logic, and power conversion, the unit supports positioning, indexing, and velocity regulation on compact or single-axis machines where stable response and synchronized motion are required.

This model communicates with higher-level control systems through the MultiEthernet interface, enabling real-time command exchange over PROFINET, EtherNet/IP, or EtherCAT networks without additional option cards. It draws power from a three-phase source rated at 3 × AC 110–230 V ±10%, and this wide input range supports use in low- and medium-voltage facilities. During rapid acceleration, the drive can deliver up to 13 A of peak current to the motor windings. Internal thermal management relies on internal air cooling through an integrated blower, and cabinet air moves across the heat sinks without external ducting. Component ingress protection is limited to IP20, so the unit must be installed inside a closed electrical enclosure.

The control section supplied with this hardware uses the basic design listed in the type code, and no advanced option modules are installed. Functional safety is provided through the integrated STO (Safe Torque Off) channel, allowing power removal to the motor without mechanical relays. Position feedback is processed through the IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, while a second interface is not installed. Line-side energy is furnished by an infeeding power supply, enabling shared DC-bus operation inside the HCS01 family.