HCS01.1E-W0013-A-02-B-ET-EC-NN-L3-NN-AW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911391357
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0013-A-02-B-ET-EC-NN-L3-NN-AW is an HCS Drive Controller from the HCS IndraDrive Controllers series. It offers a device peak current of 13 Amps and supports a MultiEthernet communication interface. The unit has an internal air cooling method through an integrated blower and features IP20 protection, while the control section design is BASIC and includes an STO safety interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat produced the HCS01.1E-W0013-A-02-B-ET-EC-NN-L3-NN-AW for the HCS IndraDrive Controllers series. This HCS drive controller coordinates power conversion and command execution within automated machinery that runs on the HCS01 line architecture. By integrating the control and power sections into a single housing, the device provides regulated drive functions for low-to-medium current axes without requiring external power modules. It is intended for cabinet-based motion systems where compact drive hardware and networked control are both required.
The control section uses the Basic design and provides standard motion functions for the axis. Network exchange occurs over MultiEthernet, which supports several industrial protocols through the same port. The unit accepts 3 x AC 110–230 V ±10%, and its rectifier can deliver up to 13 A of peak current to the inverter stage. Thermal management uses internal air cooling, driven by an integrated blower. A Safe Torque Off circuit is present, and Interface 2 is not equipped, which leaves that connection point unused. The housing is design version 1.
For feedback handling, Interface 1 accommodates Encoder IndraDyn Hiperface/EnDat 2.1/2.2, allowing position signals to reach the controller without additional gateway cards. Electrical parts are protected only against fingers and solid objects larger than 12 mm because the enclosure rating is IP20, which requires cabinet mounting. The safety interface is provided as STO (Safe Torque Off) signaling lines on the front connector for drive shutdown. Power is drawn through an infeeding and fed supply configuration, so the device can share a common DC bus with other HCS units in the same cabinet. This arrangement supports coordinated installation of feedback, safety, and power distribution within one enclosed drive system.
Frequently Asked Questions about HCS01.1E-W0013-A-02-B-ET-EC-NN-L3-NN-AW:
Q: What type of communication interface does the HCS01.1E-W0013-A-02-B-ET-EC-NN-L3-NN-AW support?
A: The HCS01.1E-W0013-A-02-B-ET-EC-NN-L3-NN-AW drive controller is equipped with a MultiEthernet communication interface.
Q: How is the HCS01.1E-W0013-A-02-B-ET-EC-NN-L3-NN-AW cooled during operation?
A: This drive controller uses an internal air cooling method with an integrated blower.
Q: What is the peak current capability of the HCS01.1E-W0013-A-02-B-ET-EC-NN-L3-NN-AW controller?
A: The device has a peak current rating of 13 A, allowing for moderate-duty applications.
Q: What mains voltage range does the HCS01.1E-W0013-A-02-B-ET-EC-NN-L3-NN-AW accept?
A: The HCS01.1E-W0013-A-02-B-ET-EC-NN-L3-NN-AW operates with a mains voltage of 3 x AC 110 to 230 V with a tolerance of ±10%.
Q: What type of safety interface is included on the HCS01.1E-W0013-A-02-B-ET-EC-NN-L3-NN-AW drive controller?
A: This controller features a Safe Torque Off (STO) safety interface.
