Product Description:

The HCS01.1E-W0013-A-02-B-ET-EC-EP-L4-NN-AW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It serves as the power and regulation core between a three-phase supply and synchronous or asynchronous motors used in industrial automation cells and machine tools. By integrating drive electronics, safety logic, and network connectivity into a compact housing, the unit handles torque, speed, and position commands issued by higher-level control systems. This arrangement lets a central motion platform manage acceleration, speed regulation, and stopping functions for a connected axis without requiring separate control hardware at the motor.

The controller accepts a mains supply of 3 x AC 110…230 V ±10% and can deliver up to 13 A of peak output current to the connected motor windings. Heat produced by the power stage is removed by internal blower cooling, so the thermal load is managed inside the cabinet and airflow around adjacent devices can remain straightforward. The control section is classified as BASIC, and the enclosure has an IP20 rating for installation inside a protected control cabinet. Its power supply topology supports infeeding and feeding on the DC bus, allowing energy sharing with other compatible drives. No additional mechanical design features are included.

Field integration is handled through the MultiEthernet port, which supports several real-time industrial protocols for communication with higher-level controllers. Motor feedback enters on the single-cable interface for IndraDyn Hiperface/EnDat 2.1/2.2 encoders, which combines motor and feedback connections at the axis. Machine safety is covered by the certified STO and SBC channels that remove motor torque and control the brake state as required. The drive belongs to the HCS01 line series, and an internal infeed module manages energy recovery and DC distribution. With no auxiliary options installed, wiring is limited to supply, motor, brake, and communication leads.