Product Description:

The HCS01.1E-W0013-A-02-B-ET-EC-EC-L3-NN-AW is a compact drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. As an HCS drive controller, it forms the power and logic core between factory mains and servo or induction motors, regulating torque and speed commands issued by higher-level PLCs. By integrating power conversion, feedback processing, and safety functions in a single chassis, this unit is intended for modular automation cabinets where space and wiring simplicity are critical.

Network connectivity is provided through MultiEthernet, allowing the controller to join Profinet, EtherNet/IP, or EtherCAT segments without hardware changes. The device can deliver up to 13 A of peak output current, which provides headroom for acceleration events or short load surges beyond the continuous rating. Supply power enters on three phases at 3 × AC 110–230 V ±10%, and this wide window supports worldwide low-voltage mains while tolerating typical installation fluctuations. An enclosure classification of IP20 indicates that live parts are finger-safe, but the unit must be mounted in a protected cabinet.

The control section is the BASIC variant in design version 1, so its parameter options suit entry-level motion tasks without additional expansion cards. Thermal management relies on internal air cooling generated by an integrated blower, which keeps airflow contained within the drive assembly. Both feedback ports accept Hiperface/EnDat 2.1/2.2 encoders from IndraDyn motors, enabling absolute position transfer over a single cable. The integrated power module works in infeed and feed operation, so regenerative energy can be returned to the DC bus or used locally by a neighboring axis. The drive includes STO, which removes gate signals to the IGBTs within milliseconds to prevent unintended motor torque during an emergency stop.